Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent abrasion resistance.
- Very good chemical resistance.
- Good wear life.
- Ideal for higher load carrying applications.
Applications & Uses
- Applications
- Application Area
- Application Method
- Markets
- Aerospace/Defense
- Medical
- Industrial Machinery & Equipment
- Mechanical Components
- Typical Applications
- Virtually all fasteners.
- Bearing and cams.
- Gears and splines.
- Engine ring seals.
- Suggested Pretreatment
Grit Blast and/or Phosphate
- Suggested Application Method
Dip Spin / Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume.
- Cure Cycle
1 hour at 375°F ± 25°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
Value | Units | Test Method / Conditions | |
Binder | High Molecular Weight Epoxy | — | — |
Carrier | Water Based | — | — |
Appearance | Gray / Black Matte Finish | — | — |
Density | 9.5 - 10.5 | Ib/gal | — |
Flash Point | min. 200 | — | — |
Lubricating Solid | MoS₂, Graphite | — | — |
Solids (By Weight) | 33 - 39 | % | — |
Theoretical Coverage (0.5 mils) | 764.0 | ft²/gal | — |
VOC Content | 175.0 | grams/liter | — |
Value | Units | Test Method / Conditions | |
Abrasion Resistance | Excellent | — | ASTM D-4060 |
Coefficient of Friction | 0.02 - 0.04 | — | ASTM D2714 |
Corrosion Resistance Test Panel (5% Neutral Salt Spray) | max. 100 | hours | ASTM B117 |
Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.8 | mil | — |
Dilution Ratio (Product to Solvent) | 0 to 9:1 | — | — |
Dry Film Thickness | 0.2 - 0.5 | mils | — |
Load Carrying Capacity | max. 100000 | psi | ASTM D2625, Method B |
Operating Temperature Range | -100 - 400 | °F | — |
Wear Life | 120.0 | minutes | ASTM D2625, Method A |
Value | Units | Test Method / Conditions | |
Acetone | Pass | — | ASTM D-2510, Method C |
Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
Cleaning Compound (MIL-C-372) | Pass | — | ASTM D-2510, Method C |
Diethanolamine | Pass | — | ASTM D-2510, Method C |
Distilled Water | Pass | — | ASTM D-2510, Method C |
Freon TF (MIL-C-81302) | Pass | — | ASTM D-2510, Method C |
Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
Hydrochloric Acid (10%) | Pass | — | ASTM D-2510, Method C |
Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
Lubricant/Cleaner (MIL-L-63460) | Pass | — | ASTM D-2510, Method C |
Lubricating Oil (MIL-L-14107) | Pass | — | ASTM D-2510, Method C |
Lubricating Oil (MIL-L-46000) | Pass | — | ASTM D-2510, Method C |
Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
Reagent (H20) | Pass | — | ASTM D-2510, Method C |
Sea Water | Pass | — | ASTM D-2510, Method C |
Silicone Damping Fluid (VV-D-1078) | Pass | — | ASTM D-2510, Method C |
Skydrol 500 | Pass | — | ASTM D-2510, Method C |
Sodium Hydroxide (10%) | Pass | — | ASTM D-2510, Method C |
Synthetic Hydraulic Fluids (MIL-H-83282) | Pass | — | ASTM D-2510, Method C |
Synthetic Lube Oil (MIL-L-23699) | Pass | — | ASTM D-2510, Method C |
Synthetic Turbine Lube Oil (Mil-L-7808) | Pass | — | ASTM D-2510, Method C |
Toluene | Pass | — | ASTM D-2510, Method C |
Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging Type
- Packaging
Everlube 9001 is available is gallon, 5-gallon pail, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.