Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent wear life
- Very good chemical resistance.
- Excellent abrasion resistance.
- Lead free
Applications & Uses
- Applications
- Application Method
- Markets
- Aerospace/Defense
- Fasteners
- Industrial Machinery & Equipment
- Mechanical Components
- Typical Applications
- Virtually all fasteners.
- Bearing and cams.
- Gears and splines.
- Engine ring seals.
- Suggested Pretreatment
Grit Blast and/or Phosphate
- Suggested Application Method
Dip Spin, Brush or Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume.
- Cure Cycle (Recommended)
1 hour 15 minutes at 400°F (recommended) or 2 hours at 300°F (for substrates that cannot take recommended cure).
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
Value | Units | Test Method / Conditions | |
Binder | High Molecular Weight Epoxy | — | — |
Carrier | Water Based | — | — |
Appearance | Gray / Dark Gray Matte Finish | — | — |
Density | 10.4 - 11.4 | Ib/gal | — |
Flash Point | min. 200 | — | — |
Lubricating Solid | MoS₂ | — | — |
Solids (By Weight) | 40 - 44 | % | — |
Theoretical Coverage (0.5 mils) | 698.0 | ft²/gal | — |
VOC Content | 183.0 | grams/liter | — |
Value | Units | Test Method / Conditions | |
Abrasion Resistance | Excellent | — | ASTM D-4060 |
Coefficient of Friction | 0.04 - 0.06 | — | ASTM D2714 |
Corrosion Resistance Test Panel (5% Neutral Salt Spray) | min. 100 | hours | ASTM B117 |
Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.8 | mil | — |
Dilution Ratio (Product to Diluent) | 0 to 9:1 | — | — |
Dry Film Thickness | 0.2 - 0.5 | mils | — |
Load Carrying Capacity | min. 250000 | psi | ASTM D2625, Method B |
Operating Temperature Range | -100 - 400 | °F | — |
Wear Life | min. 450 | minutes | ASTM D2625, Method A |
Value | Units | Test Method / Conditions | |
Acetone | Pass | — | ASTM D-2510, Method C |
Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
Diethanolamine | Pass | — | ASTM D-2510, Method C |
Distilled Water | Pass | — | ASTM D-2510, Method C |
Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
Hydrochloric Acid (10%) | Pass | — | ASTM D-2510, Method C |
Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
Skydrol 500 | Pass | — | ASTM D-2510, Method C |
Sodium Hydroxide (10%) | Pass | — | ASTM D-2510, Method C |
Toluene | Pass | — | ASTM D-2510, Method C |
Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging Type
- Packaging
Everlube 9002 is available is gallon, 5-gallon pail, and quart.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.