Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent abrasion resistance.
- Very good corrosion resistance.
- Very good chemical resistance.
- Ideal for low friction applications.
Applications & Uses
- Applications
- Application Area
- Application Method
- Markets
- Medical
- Semiconductor
- Fabricated Metal Parts
- Fasteners
- Typical Applications
- Virtually all fasteners.
- Pump and valve components.
- Locking mechanisms.
- Springs and coils.
- Suggested Pretreatment
Grit Blast and/or Phosphate
- Suggested Application Method
Dip Spin / Spray
- Dilution/Cleanup Solvent
May be thinned with Deionized Water less than 10% by volume if needed.
- Cure Cycle
1 hour at 325°F to 350°F.
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
| Value | Units | Test Method / Conditions | |
| Binder | High Molecular Weight Polymer | — | — |
| Carrier | Water Based | — | — |
| Appearance | Satin Black Finish | — | — |
| Density | 9 - 10 | Ib/gal | — |
| Flash Point | min. 200 | — | — |
| Lubricating Solid | PTFE | — | — |
| Solids (By Weight) | 34 - 36 | % | — |
| Theoretical Coverage (0.5 mils) | 738.0 | ft²/gal | — |
| VOC Content | 359.0 | grams/liter | — |
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | Excellent | — | ASTM D-4060 |
| Coefficient of Friction | 0.06 - 0.08 | — | ASTM D2714 |
| Corrosion Resistance Test Panel (5% Neutral Salt Spray) | 400.0 | hours | ASTM B117 |
| Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.8 | mil | — |
| Dilution Ratio (Product to Solvent, By Volume) | Concentrate to 9:1 | — | — |
| Dry Film Thickness | 0.3 - 0.7 | mils | — |
| Load Carrying Capacity | max. 20000 | psi | ASTM D2625, Method B |
| Operating Temperature Range | -100 - 400 | °F | — |
| Wear Life | min. 50000 | cycles | ASTM D2625, Method A |
| Value | Units | Test Method / Conditions | |
| Acetone | Pass | — | ASTM D-2510, Method C |
| Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
| Diethanolamine | Pass | — | ASTM D-2510, Method C |
| Distilled Water | Pass | — | ASTM D-2510, Method C |
| Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
| Hydrochloric Acid (10%) | Pass | — | ASTM D-2510, Method C |
| Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
| Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
| Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
| Skydrol 500 | Pass | — | ASTM D-2510, Method C |
| Sodium Hydroxide (10%) | Pass | — | ASTM D-2510, Method C |
| Toluene | Pass | — | ASTM D-2510, Method C |
| Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging Type
- Packaging
Everlube 9500 is available is gallon, quart, and 5-gallon pail.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.