Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Good wear life.
- Excellent thermal stability.
- Easily cleaned from part after forming.
- Excellent lubricant for forming operations.
Applications & Uses
- Markets
- Application Method
- Markets
- Industrial Machinery
- Fasteners
- Fabricated Mmetal Parts
- Mechanical Components
- Typical Applications
- Super-plastic titanium forming.
- Stamping lubricant.
- Cold forging lubricant.
- Aluminum forming compound.
- Suggested Pretreatment
Grit Blast
- Suggested Application Method
Spray
- Dilution/Cleanup Solvent
Deionized Water
- Cure Cycle
For Forming - 30 - 60 minutes at 175°F ± 25°F (79°C ± 14°C).
Other Applications - 2 hours at 175°F (66°C) then 2 hours at 400°F (204°C).
Properties
- Physical Properties
- Typical Properties
- Chemical Resistance
| Value | Units | Test Method / Conditions | |
| Binder | Inorganic | — | — |
| Carrier | Water Borne | — | — |
| Appearance | Black / Gray Finish | — | — |
| Density | 9.5 - 10.5 | Ib/gal | — |
| Lubricating Solid | Graphite | — | — |
| Solids (By Weight) | 20 - 24 | % | — |
| Theoretical Coverage (0.5 mils) | 210.0 | ft²/gal | — |
| VOC Content | 0.0 | grams/liter | — |
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | Good | — | ASTM D-4060 |
| Coefficient of Friction | 0.02 - 0.04 | — | ASTM D2714 |
| Corrosion Resistance Test Panel (5% Neutral Salt Spray) | max. 48 | hours | ASTM B117 |
| Corrosion Resistance Test Panel Coating Method (Grit Blasted Steel Panel) | 0.5 | mil | — |
| Dilution Ratio (Recommended, By Volume) | max. 10 | % | — |
| Dry Film Thickness | 0.2 - 0.5 | mils | — |
| Load Carrying Capacity | max. 40000 | psi | ASTM D2625, Method B |
| Operating Temperature Range | -100 - 1200 | °F | — |
| Wear Life | max. 60 | minutes | ASTM D2625, Method A |
| Value | Units | Test Method / Conditions | |
| Acetone | Pass | — | ASTM D-2510, Method C |
| Anti-Icing Fluids | Pass | — | ASTM D-2510, Method C |
| Diethanolamine | Pass | — | ASTM D-2510, Method C |
| Distilled Water | Not Recommended | — | ASTM D-2510, Method C |
| Hydraulic Fluids | Pass | — | ASTM D-2510, Method C |
| Hydrochloric acid (10%) | Not Recommended | — | ASTM D-2510, Method C |
| Isopropyl Alcohol or Ethyl Alcohol | Pass | — | ASTM D-2510, Method C |
| Jet Fuels (JP-4) | Pass | — | ASTM D-2510, Method C |
| Mineral Spirits or Paint Thinner | Pass | — | ASTM D-2510, Method C |
| Skydrol 500 | Not Recommended | — | ASTM D-2510, Method C |
| Sodium Hydroxide (10%) | Not Recommended | — | ASTM D-2510, Method C |
| Toluene | Pass | — | ASTM D-2510, Method C |
| Trichloroethylene | Pass | — | ASTM D-2510, Method C |
Packaging & Availability
- Packaging Type
- Packaging
Lube-Lok S22-TG is available in quarts, gallons, and 5-gallon pails.
Storage & Handling
- Shelf Life & Storage
One year from date of shipment, stored in a factory sealed container between the temperatures, 40°F to 100°F. Coatings are thermally stable, but we do not recommend prolonged exposure outside of the specified temperature range listed above.