VESTAKEEP® 5000 CF30

Identification & Functionality

Chemical Family: Polyether Ether Ketone (PEEK)
Fillers Included: Carbon Fiber
Polymer Name: Polyetheretherketone (PEEK)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics

Features & Benefits

Materials Features: Abrasion Resistant,
Acid Resistant,
Alkali Resistant,
Chemical Resistant,
Dimensional Stability,
Electrically Insulating,
Gasoline Resistant,
Good Mechanical Properties,
High Dielectric Strength,
High Pressure Applications,
High Stiffness,
High Strength,
High Temperature Application,
High Viscosity,
Hydraulic Fluid Resistant,
Hydrocarbon Resistant,
Oil Resistant,
Salt Water/Spray Resistant,
Seawater Resistant,
Solvent Resistant,
Water Resistant,
Wear Resistant

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Plastics & Elastomers End Uses: Compressor Components,
Electrical Connectors,
Packing Rings,
Seals,
Switches,
Valve Parts
Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding,
Isostatic Molding

Properties

	Value	Units	Test Method / Conditions
Density (23°C)	1.4	g/cm³	ISO 1183
Melting Range DSC (2nd Heating)	approx. 340	°C	ISO 11357
Temperature of Deflection Under Load Method A (1.8 Mpa)	324	°C	ISO 75-1
Temperature of Deflection Under Load Method B (0.45 Mpa)	338	°C	ISO 75-2
Vicat Softening Temperature Method A (10 N)	341	°C	ISO 306
Vicat Softening Temperature Method B (50 N)	339	°C	ISO 306
Tensile Test - Tensile Strength (5 mm / min)	230	MPa	ISO 527-1/-2
Tensile Test - Strain at Break (5 mm / min)	2	%	ISO 527-1/-2
Tensile Modulus	22500	MPa	ISO 527-1/-2
Charpy Impact Strength (23°C)	59C	kJ/cm²	ISO 179/1eU
Charpy Notched Impact Strength (23°C)	12C	kJ/cm²	ISO 179/1eA

Regulatory & Compliance

Knowde Enhanced TDS