Products

Dynasylan® SIVO 110 stands as a versatile, virtually VOC-free, water-borne sol-gel system. It integrates organofunctional silanes with nanoscale SiO2 particles. This product, available as an opaque to milky, colorless to slightly yellow, low-viscosity liquid, can be diluted in water and common organic solvents. Dynasylan® SIVO 110 features reactive silanol groups and Si-bonded epoxy-based organic functionalities.

TEGO® Antifoam MR 507 is an organo-modified siloxane-based antifoam that is designed for foam control in non-aqueous media. It has a high silicone content, which makes it more effective than conventional products in bio-treated diesel fuels. TEGO® Antifoam MR 507 reduces foam collapse time and initial foam height, and it maintains its performance even in wet fuel and after storage for over four weeks. It also has excellent water shedding properties and a reduced treat rate compared to conventional antifoams based on polyether siloxanes. TEGO® Antifoam MR 507 is compatible with a wide range of diesel additive packages and can be incorporated into low-solvent formulations. It is also stable at low temperatures and can be used with conventional non-polar solvents.

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

TEGO® Antifoam 288 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

Evonik VPS SIVO 280 is a groundbreaking multifunctional siloxane adhesion promoter with aminofunctionalities, finds applications across various industries. Primarily for use in adhesives & sealants, it enhances adhesion for hybrid products (e.g., silylated polyurethanes, MS Polymers®) and RTV-silicones, particularly on challenging polymethylmethacrylate (PMMA) substrates. VPS SIVO 280 also contributes to suitable adhesive cure, while imparting added flexibility and hydrophobicity.

TEGO® Antifoam 2-89 is an antifoam emulsion formulated with organo-modified siloxanes. This product functions as an anti-foaming agent, offering good compatibility with industrial processes. It belongs to the Industrial Additives and Materials category within the Construction Chemicals product family and is specifically tailored for use in cement and concrete additives.

SITREN® P 750 is a highly effective water repellent that relies on modified silanes and siloxanes supported by an inorganic carrier. This product serves the function of enhancing water repellency and belongs to the product family of finishing additives and treatments within the field of textile and leather chemicals, falling under the broader category of industrial additives and materials technologies.

TEGO® Antifoam 2263 XP is an emulsion antifoam featuring organo-modified siloxanes. This versatile product falls within the category of CASE ingredients and is specifically known for its function as an anti-foaming agent. It is most commonly applied in the production of waterborne adhesives, specifically in the realm of pressure-sensitive adhesive formulations.

TEGO® Antifoam 2360 is an emulsion antifoam formulated with organo-modified siloxanes. This anti-foaming agent is categorized under CASE ingredients and is tailored for use in melamine resin applications. It is classified within foam control additives and is presented in emulsion form.

TEGO® Antifoam MR 1015 is a highly efficient 70% active antifoam concentrate that is based on modified siloxanes. Its unique formulation and modification of the active material provide excellent efficiency and maximum compatibility, making it a superior product compared to traditional silicone oil-based antifoams. TEGO® Antifoam MR 1015 eliminates undesirable effects such as silicone spotting and fish eyes in most applications. It is highly stable in alkaline and electrolyte environments, even at higher temperatures. Additionally, TEGO® Antifoam MR 1015 is easily dispersible in water, making it easy to handle. It is an ideal antifoam concentrate for a wide range of applications where maximum compatibility and excellent efficiency are required.

Evonik Modifier 715 is another SiH-terminated polydimethyl siloxane plasticizer for addition-curing silicones. These products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers is intended to decrease crosslinking density, resulting in softer elastomers.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

Evonik Modifier 705 refers to SiH-terminated polydimethyl siloxanes utilized as plasticizers in addition-curing silicones. Due to their difunctional structure, these products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers reduces crosslinking density and, consequently, the elastomer's hardness.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

TEGO® Antifoam 2080 is a liquid antifoam formulated with organo-modified siloxanes. It excels in controlling foam within non-aqueous media, primarily finding its application in metalworking fluids. This product functions as an effective anti-foaming agent, contributing to the enhancement of fluid and lubricant solutions in the realm of industrial technology.

Evonik Polymer VS 100 comprises vinyl-terminated polydimethyl siloxanes available in various viscosity levels and molecular weights, featuring an impressively low content of volatile constituents. These polymers serve as essential base components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents, combined with the crosslinking mechanism, ensures low curing shrinkage and prevents the formation of volatile or corrosive substances during the curing process.

Evonik Polymer VS 165000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.