Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Benefits
- Extremely heat-insulating
- High stiffness
- Good load bearing capacity
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Applications
- Exolon® multi UV 5M/25-20 is ideal for flat glazing applications.
- Conservatories
- Industrial Glazing, Sports Halls
- Partition Walls
- Skylights, Northlight Glazing
- Roofing, Cladding
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Area Weight | 3.4 | kg/m² | — |
| Coefficient of Thermal Expansion | 0.065 | mm/m°C | — |
| Fire Rating | B-s1, d0 | — | EN13501-1 |
| Heat Transfer Coefficient | 1.4 | W/m²K | — |
| Light Transmittance (Uv-Absorbing, Τd65, Bronze 1845) | approx. 13 | % | — |
| Light Transmittance (Uv-Absorbing, Τd65, Clear 1099) | approx. 49 | % | — |
| Light Transmittance (Uv-Absorbing, Τd65, IQ-Relax) | approx. 32 | % | — |
| Light Transmittance (Uv-Absorbing, Τd65, White 1146) | approx. 40 | % | — |
| Maximum Service Temperature Without Load | 120.0 | °C | — |
| Possible Delivery Lengths | 2000 - 7000 | mm | — |
| Possible Expansion Due to Heat and Moisture | 3.0 | mm/m | — |
| Total Energy Transmission (Bronze 1845) | approx. 32 | % | — |
| Total Energy Transmission (Clear 1099) | approx. 48 | % | — |
| Total Energy Transmission (IQ-Relax) | approx. 34 | % | — |
| Total Energy Transmission (White 1146) | approx. 42 | % | — |
Technical Details & Test Data
- Technical Details
When using Exolon® multi UV 5M/25-20 in roof or wall installations, the forces exerted by snow and wind loads must be absorbed by a suitable substructure. We recommend implementing the support distance indicated in the diagram for the respective loads.
The diagram shows the load bearing capacity for Exolon® multi UV 5M/25-20 (supported on all sides, rebate depth ≥ 20 mm) with a standard profile on the longitudinal sides. The loadbearing curves enable the user to calculate the actual loadbearing characteristics of the multi-wall sheets in their support construction. If the rebate depth is smaller, the support distances should be reduced in accordance with the relevant load. For wind forces alone, the loads are permitted to be multiplied by 1.1.
Load bearing characteristics (determination): The component resistance (limit state of load bearing capacity) of Exolon® multi UV 5M/25-20 has been calculated by using test reports on similar products. These values are reference values, adequate safety margins must be observed in addition to these values. The margins are to be assessed on a case-by case-basis.
In general, experience has proven that a safety factor of 1.3 is adequate with regard to the measured resistance values. This safety factor is included in the load tables and diagram. These specifications do not replace national regulations, such as building inspectorate approval in Germany (DIBt), Avis Techniques in France, etc.
Load kN/m2 0.75 1 1.25 1.5 2 Width in mm Length support or m ∞ ∞ 5.4 4.2 3.4 980 Spacing A m 4.2 3.4 3 2.5 2 1,200 m 1.6 1.3 1.2 1.1 - 2100
Packaging & Availability
- Available Sizes
Sheet Width : 980, 1200, 1230, 2100 mm