Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Increased Production - Increased parts life reduces downtime for repairs or parts replacement coupled with decreased labor to repair those parts. Increased production increases revenues.
- Excellent Corrosion Protection - SMG-2 provides long life in corrosive environments.
- Resistance to Water - These greases are insoluble in water
- High Extreme Pressure Properties - They will carry heavy loads due to inherent EP properties.
- Excellent Shear Stability - Will not thin down due to heat or shear, even with a heavy water wash.
- Excellent Thermal Stability - May be used to 572°F with proper relubrication cycles.
Applications & Uses
- Markets
- Application Area
- Applications
SMG-2 grease is ideal where hot and cold, low and high-speed bearings must share the same lubricant. Designed for wet and hot end use for roll neck journal bearings found in Paper & Steel Mill operations. Excellent for heavily loaded hinge pins, splines, couplings, CV and universal joints. Use on rolling mills, slabbing mills, truck chassis, wheel bearings; also general lube points on track rolls of heavy duty construction and earth moving equipment.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Kinematic Viscosity of Base Oils (40°C) | 216.0 | cSt | - |
Worked Penetration (60 Strokes, 25°C) | 270 - 295 | mm/10 | - |
Mechanical Stability (P 100000 Strokes, % Change From P60) | 2.5 | % | - |
Mechanical Stability (P 100000 Strokes, 50% H2O, % Change From P60) | max. 6.0 | % | - |
Shell Roll Stability (% Change From P60) | max. 4.0 | % | - |
Timken OK Load | 60.0 | lbs | - |
4-Ball EP Weld Load | 500.0 | kgf | - |
LWI | max. 75 | - | - |
4 Ball Wear, Scar Dia (40kg Load, 1200 RPM, 75°C, 1h) | 0.5 | mm | - |
Dropping Point | 572.0 | °F | - |
Rust Test | Pass | - | - |
Copper Corrosion | 1B | - | - |
Salt Fog Spray | min. 1000 | h | - |
Water Washout (80°C) | 1.0 | % | - |
Oxidation Bearing Life | 200.0 | h | - |
Rotary Bomb Oxidation (PSI Drop, 500h) | 6.0 | lbs. | - |