Products

BioFusion venom green is a new generation bio-based material specially developed for designers and makers. The material is offered in vivid colors. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

Extrudr PETG transparent orange is one of the world‘s most common thermoplastic polymers. Extrudr PETG was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the FDA-, REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

XPETG CF Carbon is one of the world‘s most common thermoplastic polymers. Extrudr XPETG CF was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards. PETG is flame retardant according to UL 94 at a wall thickness of 3.2 mm.

Extrudr Flex Hard White is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

GreenTEC blue is a biopolymer specially developed for high-performance applicationswhere high temperature resistance and good mechanical properties are needed. In addition, the raw material is approved according to the FDA-, REACH- and RoHS- Standards.

DuraPro ASA Red is a weatherproof and UV-resistant copolymer developed for industrial applications. It is characterized by high process reliability and is ideally suited for mechanically highly stressed components. The material is electrically insulating. DuraPro ASA is optimized for good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

XPETG MATT Black is one of the world‘s most common thermoplastic polymers. Extrudr XPETG Matt was developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is approved according to the REACH- and RoHS-Standards.

Extrudr PLA NX1 Gold is made from a sustainable biopolymer which offers good mechanical properties. The material is suitable for industrial use, rapid prototyping, architecture, food-applications, etc. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

Extrudr Flex Medium Blue is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

GreenTEC Pro Carbon carbon is a biopolymer made from renewable resources with10% carbon fiber. The material offers high rigidity, very good mechanical properties and an increased temperature resistance. In addition, the raw material is approved according to the REACH- and RoHS-Standards.

Extrudr Flax beige is made from renewable resources and it allows fast productionspeed thanks to added mineral filler. The material is developed for rapid prototyping applications. At high temperatures and regular printing speed, the surface becomes coarse and resembles sandstone. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

Extrudr Flex Semisoft black is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

Extrudr Pearl Nature is made from renewable resources and is developed for rapidprototyping applications. The material offers excellent tensile stretch properties. The raw material is approved according to the REACH-, RoHS- and FDAStandards.

Extrudr PLA NX2 Purple is made form a renewable biopolymer. It combines good mechanical properties with high flexibility. It is suitable for industrial use, rapid prototyping, architecture, food-applications, etc. The raw material is approved according to the REACH-, RoHS- and FDA- Standards.

Extrudr Wood Brown is made from renewable resources like lignin and other biopolymers. This wood-fiber reinforced plastic boasts extraordinary processing properties. In addition, the raw material is approved according to the REACH-, RoHS- and FDA-Standards.

DuraPro ABS Silver was specially developed for industrial applications and is characterized by its high process reliability. It is ideally suited for the production of mechanically highly stressed components. The material is electrically insulating. DuraPro ABS is optimized in regards to good layer adhesion, thermal stability, better flow properties and lower warping tendencies. The raw material is approved according to the REACH-, RoHS- and FDA-Standards.

GreenTEC Pro Silver is a high-performance biopolymer, with optimized characteristics for technical and mechanical applications. This material offers excellent temperature resistance and layer adhesion, as well as an appealing semi-matt finish. GreenTEC Pro is in compliance with the FDA-, REACH- and RoHS-Standards.