Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Reinforcement Material
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Features
GENESIS™ XF Fibrillated Fibers are specially engineered with a patented technology that enhances mechanical bonding with the mortar mix through a micro-reinforcing system. This system improves the residual strength by 26% compared to other leading fibrillated fiber products on the market today. The unique technology of GENESIS™ XF Fibers also provides excellent temperature shrinkage and plastic shrinkage crack control.
GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.
- Benefits
- Eliminates the need for WWF as a secondary form of reinforcement. Does not replace primary/structural reinforcement.
- Delivers tight crack control.
- Enhances long-term durability.
- Improves green strengths – permits earlier stripping of forms with less rejection.
- Reduces construction time and overall labor and material costs.
- Increases flexural toughness, impact and abrasion resistance.
Applications & Uses
- Applications
- Recommended for Use in
- Residential and commercial slabs-on-ground
- Concrete pavement
- Whitetopping and overlays
- Marine elements
- Shotcrete
- Precast products
- Composite metal decks
- Stucco
- Engineering Specifications
Use only GENESIS™ XF Fibrillated Fibers specifically engineered and manufactured for use in concrete as secondary reinforcement. GENESIS™ XF Fibers are for the control of cracking due to drying shrinkage, thermal expansion and contraction, lowered permeability, increased impact, shatter and abrasion resistance. GENESIS™ XF Fibers comply with applicable building codes and ASTM C1116/C1116M, Section 4.1.3, Type III. GENESIS™ XF Fibrillated Fibers should be specified for use in precast and slab-on-ground concrete:
- To enhance post cure residual strength, toughness and durability
- To enhance post, first-crack performance
- To reduce chipping, cracking & breakage
- To reduce handling & transportation stresses
- To reduce de-molding and stripping issues
- To increase impact & abrasion resistance
FABPRO POLYMERS’ GENESIS™ XF fibers are not intended to be used as a replacement for structural reinforcement.
- Guidelines for Use
- Dosage: GENESIS™ XF Fibrillated Fibers are typically added at a dosage rate of 1.5 lb/yd3 (0.9 kg/m3 ). Different dosage rates may be appropriate depending on the application.
- Mixing: GENESIS™ XF Fibrillated Fibers are packaged in premeasured, ready-to-use, degradable bags, designed to be introduced into the mix at any time before, during or after other ready-mixed concrete materials produced in accordance with procedures specified in ASTM C94/C94M. Standard practices detailed in ACI 302 for placing, finishing and curing concrete should be followed when using GENESIS™ XF Fibrillated Fibers.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 0.91 | — | — |
| Melting Point | 320.0 | °F | — |
| Ignition Point | 1094.0 | °F | — |
| Absorption | Nil | — | — |
| Alkali Resistance | Excellent | — | — |
| Tensile Strength | 60000.0 | psi | — |
| Length (Plus a Bi-Blend) | 0.25 - 1.5 | inch | — |
| Aspect Ratio (For ¾” cut length) | 29.0 | — | — |
| Chemical Resistance | Excellent | — | — |
| Modulus of Elasticity | 900.0 | ksi | — |
Packaging & Availability
- Packaging Type
- Packaging
GENESIS™ XF Fibrillated Fibers are available in a variety of packaging options. Standard bag size is 1.5 lbs (0.68 kg). Bags are packaged in ultra-durable boxes, palletized, and stretch-wrapped with corner boards to prevent damage from shipping and handling.
Storage & Handling
- Storage and Handling
GENESIS™ XF Fibrillated Fibers should be stored at temperatures below 140°F (60°C). Avoid storing near strong oxidizers and avoid sources of ignition. Use caution when stacking to avoid unstable conditions. Store in a sprinkled warehouse.