Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications & Uses
Directions For Use
User must read and understand all instructions and precautions outlined on this label and the corresponding sds. For professional use only. Additive for use with fiberlock’s advanced peroxide cleaner (#8314) only. Do not mix with any other product.
Note: The HydroBoost mixture should be used within 20-30 minutes to achieve the full effect of the product. Application to the substrate within 5-10 minutes is ideal. Plan your work accordingly so that you can apply all mixed product as quickly as possible.
Do not return unused product to original container. Add Hydroboost to Advanced Peroxide Cleaner at the following dilution ratio:
- Minimum: 10:1 (12.8 oz./gallon) 1 Quart of Hydroboost to 2.5 Gallons of APC
- Maxmium: 8:1(16 oz./gallon) 1 Quart of Hydroboost to 2 Gallons of APC Mix contents thoroughly and apply within 30 minutes of mixing.
Apply with a standard pump or hand trigger sprayer.
Coverage
When mixed with Advanced Peroxide Cleaner, 500 - 1200 ft2 /gal.
Application Information
Manufacturers of chlorinated polyvinyl chloride (“CPVC”) pipe believe that it can be sensitive to or incompatible with chemicals found in many commonly used household and industrial cleaning products, coatings, adhesives and other compounds, and that those chemicals can cause stress cracks or pipe failure. It is recommended that users always check pipe for markings that indicate the type of material it is made of and that users contact the pipe manufacturer directly before applying any Fiberlock products to CPVC pipe.
Properties
- Physical Form
- Odor
- Mild
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Ingredient | Sodium Metasilicate | - | - |
| Foaming | High Foaming | - | - |
| Flash Point | Non-combustible | - | - |
| pH | 13 - 14 | - | - |
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Precautions
- Store in a dry place at temperatures between 40°F (4.5°C) and 90°F. (32°C). Always take care to avoid skin and eye contact by using protective measures such as nitrile rubber gloves (or equivalent) and safety glasses. Avoid breathing spray mists. HydroBoost is a high pH additive formulated to boost the performance of the Advanced Peroxide Cleaner. Do not use this product on any surface that could be damaged by a high pH alkaline cleaner.
- Always test substrate in an inconspicuous area to determine if the solution will adversely affect the target material. This product is not intended for use on aluminum, magnesium, zinc or other soft metals as pitting and etching can occur. Will degloss painted surfaces. Do not use on fine or finished woods as APC Booster can affect the finish of the wood.
- Do not use on glass. Protect floors and surrounding surfaces from contact. Promptly clean off any overspray or dripping from floors.
- Keep out of reach of children.
- Do not take internally. Close container after each use. Keep from freezing. Properly dispose of all waste and unused product in accordance with Local, State and Federal regulations.
Packaging & Availability
- Packaging Type
- Packaging & Availability
1 quart containers / 12 per case.
Storage & Handling
- Storage
- Store securely closed and upright in original container.
- Avoid shipping or storing below freezing or above 100°F.
- If product freezes, thaw at room temperature and shake gently to remix components.
- Store in locked area inaccessible to children.
- Store between 40°F (4.5°C) and 90°F (32°C).
- Shelf Life
3 Years Minimum (Original Sealed Containers)