Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications & Uses
Application Procedures
Test textiles & fabrics for color stability in an inconspicuous area prior to use. Always take care to avoid skin and eye contact by using protective measures such as nitrile rubber gloves (or equivalent) and safety glasses. IAQ 1000 is suitable for use on carpets, carpet cushion, sub floors, drywall, trim and frame lumber, tackless strip and paneling. Use proper ventilation.
Special Instructions for Cleaning Carpet
- For use on wet cleanable synthetic fibers. Do not use on wool. Vacuum carpet thoroughly prior to cleaning. Test fabric for color fastness. For portable extraction units: Mix 1 part IAQ 1000 with 1 part water. For rotary floor machines: Mix 1 part IAQ 1000 with 1 part water and apply at the rate of 500-1000 sq. ft. per gallon.
- Do not mix this product with other cleaning products. Follow the cleaning procedures specified by the manufacturer of the cleaning equipment. After using the product, set the carpet pile and protect the carpet from furniture legs and bases while drying. Do not over-wet. If applied to stain resistant nylon carpet, follow up by applying a fabric protector recommended by the carpet manufacturer.
Fiberlock Products and CPVC Compatibility
Manufacturers of chlorinated polyvinyl chloride (“CPVC”) pipe believe that it can be sensitive to or incompatible with chemicals found in many commonly used household and industrial cleaning products, coatings, adhesives and other compounds, and that those chemicals can cause stress cracks or pipe failure. It is recommended that users always check pipe for markings that indicate the type of material it is made of and that users contact the pipe manufacturer directly before applying any Fiberlock products to CPVC pipe.
Properties
- Physical Form
- Odor
- None
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Ingredient | Hydrogen Peroxide | — | — |
| Foam | 0.0 | — | — |
| Flash Point | Non-combustible | — | — |
| pH | 6.5 - 7.5 | — | — |
Regulatory & Compliance
Safety & Health
- Precautions
Eye irritant. May cause skin irritation with prolonged contact. Avoid contact with eyes, skin and clothing. Wear nitrile gloves and safety glasses when handling. Do not take internally. Keep out of the reach of children.
Eye Contact - Flush immediately with plenty of water for at least 15 minutes and get medical attention. SKIN CONTACT: Rinse thoroughly with water. Seek medical attention if irritation persists. Possible irritation and/or dying of skin from allergic reaction or prolonged contact.
Inhalation - Remove to fresh air. INGESTION: Get medical attention immediately. Give large quantities of water or milk. Never give anything by mouth to an unconscious person. Do not induce vomiting.
Keep out of reach of children.
Packaging & Availability
- Packaging Type
- Packaging & Availability
5 Gallon Containers.
Storage & Handling
- Storage
Store in securely closed and upright in original container. Ventilated cap could leak if container is placed on side. Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Avoid shipping or storing below freezing, in sunlight, or above 90F. If product freezes, thaw at room temperature and shake gently to remix components. Store in locked area inaccessible to children.
- Shelf Life
12 months minimum in original sealed container.