company tower banner
Fiberlock Technologies Company Logo

Shockwave™ -8310

1 of 3 products in this brand
Shockwave™ - 8310 is an EPA registered disinfectant, sanitizer and cleaner designed specifically for mold remediation contractors. ShockWave is designed to meet all your disinfecting, sanitizing, cleaning, and de-odorizing needs. ShockWave is strong enough to be used in a hospital or medical environment, and has been specifically formulated to be used on both porous and non-porous materials. ShockWave is a powerful concentrated quaternary ammonium chloride blend that yields up to 64 gallons of usable product from every gallon of concentrate. ShockWave has over 130 organism kill claims including Aspergillus niger, Penecillium spinulosum, E. coli, Salmonella, HIV, Hepatitis-B, Herpes, Poliovirus, and many other pathogenic and environmental microbial organisms.

Product Type: Cleaner, Degreasers, Disinfectant Products, Mold Release Agent, Sanitizers

Application Area: Carpets

Certifications & Compliance: EPA Registered

Features: Bacteria Resistant, Cost Effective, Degreasing, Facilitates Mold Removal, Fungus Resistant, Mildew Resistant, Neutralizes Odor

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Active Ingredients
Alkyl (C14 60%, C16 30%, C12 5%, C18 5%) dimethyl benzyl ammonium chloride 2.37%
Alkyl (C12 68%, C14 32%) dimethyl ethylbenzyl ammonium chloride 2.37%
Other Ingredients 95.26%
Total 100.00%

 

Features & Benefits

Applications & Uses

Markets
Application Area
Applications & Uses

Directions

  • Water Damage Restoration - This product is particularly suitable for use in water damage restoration situations to sanitize against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushion, subfloors, drywall, trim and frame lumber, tackless strip and paneling. Using solutions recommended, saturate affected materials with enough product to remain wet for at least 10 minutes.
  • Sewer Backup & River Flooding - During mitigation procedures, dilute 2-4 ounces of the product per gallon of water allowing for the diluting effect of absorbed water within saturated materials. Remove gross filth or heavy soil along with non-salvageable materials. Saturate all affected areas with a sprayer using a coarse spray tip, before and after cleaning and extraction.
  • Disinfection -Add two ounces of ShockWave per gallon of water. Remove gross filth or heavy soil. For heavily soiled areas, a precleaning step is required. Apply solution with a cloth, mop, sponge, or hand pump trigger sprayer such that all surfaces remain wet for 10 minutes. Let air dry. Prepare a fresh solution for each use. ShockWave is effective in hard water up to 300 ppm hardness (calculated as CaCo3) and in the presence of organic soil (5% blood serum).
  • Fungicide - At 2 oz. per gallon, ShockWave is effective against the pathogenic fungi, Trichophyton mentagrophytes in 5% organic soil. Contact time - 10 minutes. Virucidal: When used on inanimate, hard, non-porous, environmental surfaces at 2 ounces per gallon of water for a 10 minute contact time (5% organic soil), except forPoliovirus type 1 (strain): which requires a 20 minute contact time (5% organic soil) and HIV-1 which requires only a 30 second contact time. Cleaning and Deodorization: ShockWave deodorizes garbage storage areas, empty garbage bins and cans, toilet bowls and any other odor-causing areas. Mix 2 ounces per gallon of water and apply solution to surfaces. Be sure to thoroughly wet surfaces, allow to air dry.

Fiberlock Products and CPVC Compatibility

Manufacturers of chlorinated polyvinyl chloride (“CPVC”) pipe believe that it can be sensitive to or incompatible with chemicals found in many commonly used household and industrial cleaning products, coatings, adhesives and other compounds, and that those chemicals can cause stress cracks or pipe failure. Fiberlock recommends that users always check pipe for markings that indicate the type of material it is made of and that users contact the pipe manufacturer directly before applying any Fiberlock products to CPVC pipe

Properties

Physical Form
Odor
Fresh Linen
Typical Properties
ValueUnitsTest Method / Conditions
Active IngredientQuaternary Ammonium Chloride
Foam0.0
Flash Pointmin. 200°F
pH11.7

Regulatory & Compliance

Certifications & Compliance
Testing
  • EPA Registration Number: 61178-1-73884
  • EPA Est. Number: 8325-PA-01
Regulatory & Compliance

ShockWaveRTU contributes toward satisfying IEQ Credit 3.3 under LEEDEB by complying with “California Code of Regulations Maximum Allowable VOC Levels for Disinfectants”.

Safety & Health

First Aid
  • Skin - Remove contaminated clothing. Flush affected areas with large quantities of water. Seek medical attention if irritation persists.
  • Eyes - Flush with large quantities of water, holding eyelids open. Seek medical attention.
  • Inhalation - Remove victim to fresh air and monitor. Seek medical attention if symptoms persist.
  • Ingestion - Give large quantities of water. Seek medical attention immediately.

Packaging & Availability

Available Package Sizes
  • 10 oz. bottles (24/case)
  • 1 gallon containers (4/case)

Storage & Handling

Shelf Life

36 months minimum in original sealed container.