Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
- Active Ingredients
Alkyl (C14 60%, C16 30%, C12 5%, C18 5%) dimethyl benzyl ammonium chloride 0.07% Alkyl (C12 68%, C14 32%) dimethyl ethylbenzyl ammonium chloride 0.07% Inert Ingredients 99.86% Total 100.00%
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Applications & Uses
Application Information
- Water Damage Restoration - This product is particularly suitable for use in water damage restoration situations to sanitize against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushion, subfloors, drywall, trim and frame lumber, tackless strip and paneling. Use as supplied, saturate affected materials with enough product to remain wet for at least 10 minutes. Use proper ventilation.
- Disinfect/Clean/Deodorize - Preclean all heavily soiled surfaces prior to product application. To clean, deodorize, and disinfect apply product with a cloth, sponge or other suitable applicator until surface is thoroughly wet. Wait 10 minutes, and wipe dry or air dry. Do not use on glasses, dishes or utensils.
- Fungicidal - Kills Trichophyton mentagrophytes on hard nonporous surfaces. Spray solution making sure to wet all surfaces completely. Wait 10 minutes, then remove excess liquid or allow to air dry.
- Deodorizer - This product deodorizes garbage storage areas, empty garbage bins and cans, exterior surfaces of toilet bowls and any other odor-causing areas. Spray solution makeing sure to wet all surfaces completely. Allow to air dry
Fiberlock Products and CPVC Compatibility
Manufacturers of chlorinated polyvinyl chloride (“CPVC”) pipe believe that it can be sensitive to or incompatible with chemicals found in many commonly used household and industrial cleaning products, coatings, adhesives and other compounds, and that those chemicals can cause stress cracks or pipe failure. Fiberlock recommends that users always check pipe for markings that indicate the type of material it is made of and that users contact the pipe manufacturer directly before applying any Fiberlock products to CPVC pipe.
Properties
- Physical Form
- Odor
- Fresh Linen
- Typical Properties
Value | Units | Test Method / Conditions | |
Active Ingredient | Quaternary Ammonium Chloride | - | - |
Foam | 0.0 | - | - |
Flash Point | 200.0 | °F | - |
pH | 11.7 | - | - |
Regulatory & Compliance
- Chemical Inventories
- Regulatory & Compliance
ShockWaveRTU contributes toward satisfying IEQ Credit 3.3 under LEEDEB by complying with “California Code of Regulations Maximum Allowable VOC Levels for Disinfectants”.
- Testing
- EPA Registration Number: 61178-2-73884
- EPA Est. Number: 8325-PA-01
Safety & Health
- Safety & Health
First Aid
- Skin - Remove contaminated clothing. Flush affected areas with large quantities of water. Seek medical attention if irritation persists.
- Eyes - Flush with large quantities of water, holding eyelids open. Seek medical attention.
- Inhalation - Remove victim to fresh air and monitor. Seek medical attention if symptoms persist.
- Ingestion - Give large quantities of water. Seek medical attention immediately.
Packaging & Availability
- Packaging Type
- Packaging & Availability
- 1 gallon containers (4/case)
- 5 gallon containers
Storage & Handling
- Shelf Life
36 months minimum in original sealed container.