Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Surface Preparation
Surface preparation should be carried out according to good painting practices. Remove all loose, peeling or powdery paint from the surface. All dirt, grease, oil, wax, and other foreign matter MUST be removed with a detergent. Rinse surfaces thoroughly with clear water and allow to dry. Repair all cracks, holes, and other surface irregularities. Allow to dry, sand lightly and prime repaired surfaces with No. 400.
- New and Previously Painted Surfaces
BURN Barrier No. 400 can be applied directly to most surfaces. Metal surfaces must be primed with a good quality metal primer. On combustible surfaces where maximum fire protection is required, a coat of BURN Barrier intumescent fire retardant paint should be applied before the application of Flame Control No. 400.
- Application
BURN Barrier No. 400 is ready to use. It can be applied by brush, roller, airless or conventional spray equipment. Stir thoroughly and apply, using a full-bodied coat. If thinning is required, use water only, do not exceed ½ pint per gallon. Do not apply when surface or air temperatures are below 50°F.
- Suggested Coverage Rate
300 to 420 sq.ft./U.S. gallon [7.4 to 10.3 m2/L depending on substrate.
- Drying Time
Dries to touch in approximately 30 minutes, can be recoated in 1 to 2 hours.
- Thinning
For thinning, use only water [maximum ½ pint per gallon]. For equipment clean up, use warm soapy water.
Safety & Health
- Caution
- Do not take internally
- Keep out of reach of children
Packaging & Availability
- Tinting
Available in white, off white, and colors or may be field tinted with most universal tinting colorants.
- Packaging
- 1 gallon Container
- 5 gallon Container
- 55 gallon containera
Storage & Handling
- Handling
- Close container after each use
- Protect from freezing