Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Benefits
- 2 mil polyimide film withstands intermittent heat up to 750°F (398°C) and endures wave solder and printed circuit board cleaning environments
- Tested and approved for leaded and lead free reflow (top and bottom) in the wave solder environmentAvailable on a variety of liners to meet your specific application and dispensing
- requirements (9000 with 50 lb. glassine and 9001 with 1.5 mil polyester)
- Halogen free; REACH and RoHS compliant
- Thermal transfer printable (resin ribbons)
- UL/cUL Recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
Applications & Uses
- Markets
- Applications
Properties
- Physical Properties
- Adhesion Properties
Surface Dwell Time Average Oz/in (N/m) Aluminum 15 mins. 59 -649 ASTM D 903 24 hrs. 69 -759 Stainless Steel 15 mins. 44 -484 24 hrs. 51 -561 Service Temperature Range: -40^{o} F to 356^{o} F (-40^{o} C to 180^{o} C)Intermittent Up to 750°F (398°C) FLEXcon M29 5 min. Up to 500°F (260°C) applied to Panel Expected Shear: Room Temp (hours) 50 ASTM D 3654 Method A
a. 1 hr. dwellb. 1 sq. in. surface c. 4 lb. load
Value | Units | Test Method / Conditions | |
Film | 2.0 | mils | ASTM D 3652 (Modified for use with non-tape products) |
Coating | 0.6 | mils | ASTM D 3652 (Modified for use with non-tape products) |
Adhesive | 1.45 | mils | ASTM D 3652 (Modified for use with non-tape products) |
Liner - 50 Glassine | 2.7 | mils | ASTM D 3652 (Modified for use with non-tape products) |
Liner - 150 Polyester | 1.4 | mils | ASTM D 3652 (Modified for use with non-tape products) |
Regulatory & Compliance
- UL/cUL Recognized
Under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
UL/cUL Recognized Ribbons: UL/cUL: Dia Nippon R510HF, iimak SP575, ITW Coding Products 7993, Ricoh B110CR, and
Armor AXR 1
UL only: ITW Thermal Films B814- Compliance and Content
RoHS - Restriction of Hazardous Substances
(EU Directives 2002/95/EC and 2003/11/EC):
REACH - Registration, Evaluation and Authorization of Chemicals
SVHC - Substances of Very High Concern (EU Directive 1907/2006/EC):
Halogen Free IEC 61249-2-21:
Technical Details & Test Data
- Special Considerations
- All surfaces should be clean, dry and free of any surface contamination. IPA is the recommended cleaning solution.
- We recommend exposing printed labels to high heat (302°F/150°C) prior to performance testing.
- The printed surface should not be touched while hot. The resin TTR will be soft and will smudge or remove.
- Test data is based on Laboratory test structure. Actual application testing should be done to confirm suitability for application.
- Durability
Durability: ANSI ScannabilityLeaded Reflow Up to 7 washes 1 Testing conducted atLead Free Reflow Up to 7 washes 1 ITW Speedline TechnologiesNo Reflow Up to 7 washes 1 ZESTRON and KYZEN- Chemical Resistance
Chemical Resistance: Test Fluid ANSI Scannability1 part IPA, 3 parts Mineral Spirits 1 MIL-STD-202G Terpene Defluxer 1 1 part IPA, 3 parts Mineral Spirits 1 MIL-STD-883E Terpene Defluxer 1 - Printed Circuit Board - Processing Parameters
Cleaning
AgentCleaning
Agent BaseProcess Wash
TimeWash
Temperature
(^{o} F / ^{o} C)Rinse
TimeRinse
Temperature
(^{o} F / ^{o} C)Visual
AppearanceATRON^{®} AC 205 Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change ATRON^{®*} AC 207 Aqueous Spray in Air 2.6 min 150 / 65.6 2-3 min 140 / 60 No Change Aquanox^{®} A4241 Aqueous Spray in Air 7.5 min 150 / 65.6 7.3 min 140 / 60 No Change Aquanox^{®} ** A4625 Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change Aquanox^{®} A4625B Aqueous Spray in Air 7.5 min 150/ 65.6 7.3 min 140 / 60 No Change Aquanox^{®} A4638 Aqueous Spray in Air 7.5 min 150/ 65.6 7.3 min 140 / 60 No Change Aquanox^{®} A4639 Aqueous Spray in Air 7.5 min 150/ 65.6 7.3 min 140 / 60 No Change Aquanox^{®} * A4708 Solvent Spray in Air 7.5 min 150/ 65.6 7.3 min 140 / 60 No Change HYDRON^{®} * WS 400
(high concentration 15%)Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change HYDRON^{®} WS 400
(low concentration 5%)Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change VIGON^{®} * A 201 Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 150/ 65.6 No Change VIGON^{®} N 600 Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change VIGON^{®} N 680 Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change VIGON^{®} PE 190 A Aqueous Spray in Air 2.6 min 150/ 65.6 2-3 min 140 / 60 No Change - Printed Circuit Board - Processing Results
- LEAD FREE REFLOW
Cleaning
AgentDia Nippon
R510HF♦iimak
SP575ITW Coding Products
7993ITW Thermal
Films B814▲Ricoh
B110CRATRON^{®*} AC 205 4 4 4 PR 4 ATRON^{®} AC 207 4 4 4 PR 4 Aquanox^{®*} A4241 4 NT NT 4 4 Aquanox^{®} A4625 4 4 4 NT NT Aquanox^{®} A4625B 4 NT NT 4 4 Aquanox^{®} A4638 4 NT NT 4 4 Aquanox^{®} A4639 4 NT NT 4 4 Aquanox^{®} A4708 4 NT NT 4 4 HYDRON^{®} * WS 400 (high concentration 15%) 4 4 4 4 4 HYDRON^{®} WS 400 (low concentration 5%) 4 4 4 4 4 VIGON^{®*} A 201 4 4 4 PR 4 VIGON^{®} N 600 4 4 4 PR 4 VIGON^{®} N 680 4 4 4 4 4 VIGON^{®} PE 190 A 4 4 4 4 4 Rating: 4 = Passes 4 cleanings PR = Print Removal NT = Not Tested
♦Dia Nippon R510HF ribbon is recommended for non-reflow applications ▲ITW Thermal Films B814 is UL only
*ATRON®,, HYDRON® , and VIGON® are registered trademarks of ZESTRON Americas **Aquanox® is a registered trademark of KYZENLEAD FREE REFLOWATRON^{®} AC 205 NT 4 NT 4 NT NT NT NT ATRON^{®*} AC 207 NT 4 NT 4 NT NT NT NT Aquanox^{®} A4241 4 4 4 4 4 4 4 4 Aquanox^{®} * A4625 4 4 NT NT NT NT 4 NT Aquanox^{®} A4625B 4 4 4 4 4 4 4 4 Aquanox^{®} A4638 4 4 4 4 4 4 4 4 Aquanox^{®} A4639 4 4 4 4 4 4 4 4 Aquanox^{®} A4708 4 4 4 4 4 4 4 4 HYDRON^{®} * WS 400
(high concentration 15%)NT 4 NT 4 NT NT NT NT HYDRON^{®} WS 400
(low concentration 5%)NT 4 NT 4 NT NT NT NT VIGON^{®} * A 201 NT 4 NT 4 NT NT NT NT VIGON^{®} N 600 NT 4 NT 4 NT NT NT NT VIGON^{®} N 680 NT 4 NT 4 NT NT NT NT VIGON^{®} PE 190 A NT 4 NT 4 NT NT NT NT Rating: 4 = Passes 4 Cleanings PR = Print Removal NT = Not Tested
- Printed Circuit Board - Printability
Ribbon UL/cUL
RecognizedPrint Quality ANSI
GradeScratch
ResistanceTape
ResistanceArmor AXR 1 Excellent A Excellent Excellent Armor AXR 7+ Excellent A Excellent Excellent Armor AXR 8 Excellent A Excellent Excellent Armor AXR EL Excellent A Excellent Excellent Dia Nippon R510HF • Excellent A Excellent Excellent Dia Nippon TR4070Excellent A Excellent Excellent iimak SP575 • Excellent A Excellent Excellent iimak SP330 Excellent A Excellent Excellent IMP Z302 Excellent A Excellent Excellent ITW Thermal Films B324Excellent A Excellent Excellent ITW Thermal Films B813Excellent A Excellent Excellent ITW Thermal Films B814▲ • Excellent A Excellent Excellent ITW Coding Products 7993 • Excellent A Excellent Excellent Ricoh B110CR • Excellent A Excellent Excellent Zebra 5175 Excellent A Excellent Excellent ▲ITW Thermal Films B814 is UL only
Storage & Handling
- Storage Stability
Two years when stored at 70°F (21°C) and 50% relative humidity
Minimum Application Temperature: Room temperature (65°F/18°C) is recommended