Products

Fluorcolor DI 2700 has an excellent pigmenting power and can be used in a wide range of aqueous formulations including waterborne coating, water based inks, paper coatings, latex balloons, etc. Its cross linked polymeric matrix avoid bleeding in textile inks and gives a good wash resistance. Dispersion has approximately 45% of fluorescent pigment and small quantity of glycol and thickener to assure long term stability. Even after some cycles at -20ºC, product keep its stability and recovery all its properties with a slight homogenization.

Fluorplast 410 is fluorescent pigment of excellent thermic resistance. It is indicated for use in polyolefin's, polystyrene, EVA, etc. Can be used in temperatures up to 250ºC, depending on cycle duration, keeping the fluorescence and the color stable. The colors can be mixed to achieve intermediate tonalities. The product has a polymeric matrix based on polyamide/ polyester and do not release formaldehyde smell when heated.

Fluorplast 420 is fluorescent pigment of excellent thermic resistance. It is indicated for use in polyolefin's, polystyrene, polyamide, etc. Can be used in temperatures up to 270ºC, depending on cycle duration, keeping the fluorescence and the color stable. The colors can be mixed to achieve intermediate tonalities. Due to its polymers combination, it has a low “plate out” and it is easily incorporated to polymers.

Luxcor 100 is a general use product with good solvent resistance. It can be used in paints and plastics, such as PVC and LDPE It has excellent fluorescence in white light and UV light. It is particularly indicated when the fluorescence under UV light is used in to detect leaks and cracks.

Luxcor 300 is suggested for aqueous pigment dispersions used primarily in textiles. It has excellent coverage and pigmenting power. Indicated where solvent resistance is not required.

Luxcor 200 has excellent pigmenting power and can be used in plastics, inks and paint. Due to its superior solvent resistance, it can be used to manufacture vinyl and polyurethane based inks and paints without causing storage problems. It is also indicated for use in flexible PVC and plastisol due to its resistance to bleeding.

Fluorcolor DI 2200 has superior solvent resistance can be used to manufacture vinyl and polyurethane based paints without causing storage problems. It is also indicated for use in flexible PVC plastisol and PU laminates without bleeding.

LUXCOR 500 is soluble in polar solvents with application in flexo inks and rotogravure. It has a high color strength that allows the product to be effective even in applications that form very thin films. The mixture between the available colors allows the creation of a vast pallet of colors.