Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
Addition of bronze to PTFE increases hardness and compressive strength, provides better dimensional stability and lowers creep, cold flow and wear. It also increases thermal and electrical conductivity.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Compressive Strength (at 0.2% offset, Moulding Direction) | 9.7 | Mpa | - |
| Compressive Strength (at 0.2% offset, Cross Direction) | 9.0 | Mpa | - |
| Permanent Deformation (Moulding Direction) | 4.4 | % | - |
| Permanent Deformation (Cross Direction) | 3.1 | % | - |
| Deformation Under Load (24 hours, 6.9 MPa, 23ºC, Moulding Direction) | 8.6 | % | - |
| Deformation Under Load (24 hours, 6.9 MPa, 23ºC,Cross Direction) | 7.0 | % | - |
| Coefficient of Thermal Expansion (25 - 150ºC (cm/cm/ºC), Moulding Direction) | 1.17×10^(-4) | - | - |
| Coefficient of Thermal Expansion (25 - 150ºC (cm/cm/ºC), Cross Direction) | 1.08×10^(-4) | - | - |
| Specific Gravity | 3 ± 3.2 | - | BS EN ISO 13000-2 |
| Tensile Strength | min. 19 | Mpa | BS EN ISO 13000-2 |
| Elongation | min. 230 | % | BS EN ISO 13000-2 |
| Hardness | 63 - 68 | Shore D | BS EN ISO 13000-2 |
| Maximum Working Temperature | 260.0 | °C | BS EN ISO 13000-2 |
| Thermal Conductivity | 4.3 | BTU/hr/ft2/ºF/in | - |
| Limiting PV (10 ft/min) | 7500.0 | - | - |
| Limiting PV (100 ft/min) | 12580.0 | - | - |
| Limiting PV (1000 ft/min) | 10500.0 | - | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Formulations
60% PTFE, 40% BRONZE POWDER (BY WEIGHT)