Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Typical Applications
Low friction grade of filled PEEK for production of plain bearings, low friction valve seats etc.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity (Injection Moulded) | 1.46 | — | ISO R1183 |
| Specific Gravity (Extruded) | 1.44 - 1.48 | — | H-WI-28 |
| Specific Gravity (Compression Mould) | 1.44 - 1.48 | — | H-WI-28 |
| Tensile Strength (Injection Moulded) | 131.0 | Mpa | ISO R527 |
| Tensile Strength (Extruded) | 75 - 90 | Mpa | H-WI-28 |
| Tensile Strength (Compression Mould) | min. 45 | Mpa | H-WI-28 |
| Elongation (Injection Moulded) | 3.0 | % | ISO R527 |
| Elongation (Extruded) | min. 3 | % | H-WI-28 |
| Elongation (Compression Mould) | min. 3 | % | H-WI-28 |
| Coefficient of Friction (at 20°C, 30.5m / min, 70Kg Load) | 0.11 | — | — |
| Limiting PV (at 20°C, 30.5m/min) | 1084.0 | (MPa)(m/min) | — |
| Maximum Temperature | 260.0 | °C | — |
| Minimum Temperature (All applications) | (-50) | °C | — |
| Minimum Temperature (applications specific only) | (-150) | °C | — |
Regulatory & Compliance
- Certifications & Compliance