Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Flame Rating
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.62 - 1.68 | g/cm³ | ASTM D792 |
| Water Absorption (24 Hours) | max. 0.10 | % | ASTM D570 |
| Mold Shrinkage (Along the Flow) | 2.5 | % | ASTM D955 |
| Value | Units | Test Method / Conditions | |
| Tensile Elongation at Break | min. 200 | % | ASTM D638 |
| Tensile Strength (23°C) | 40 | MPa | ASTM D638 |
| Flexural Strength (Break) | 40 | MPa | ASTM D790 |
| Folding Endurance | 250 x 108 | Cycles | ASTM D2176 |
| Flexural Modulus | 1500 | MPa | ASTM D790 |
| Hardness | D75 | Shore D | ASMT D785 |
| Izod Notched Impact (23°C) | No break | J/m | ASMT D256 |
| Coefficient of Dynamic Friction | 0.2 | - | ASTM D1894 |
| Value | Units | Test Method / Conditions | |
| Melting Temperature | 222 | °C | ASTM D3418 |
| Max Operating Temperature | 150 | °C | - |
| Flammability Rating | V - 0 | — | UL94 |
| Heat Deflection Temperature (0.45 Mpa) | 90 | °C | ASTM D648 |
| Short Term Service Temperature | - 100 | °C | - |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant (1 khz) | 2.48 | - | ASTM D150 |
| Dielectric Strength (23°C, 1.0 mm) | 30 | kV/mm | ASTM D149 |
| Dissipation Factor (1Ghz) | 0.0012 | — | ASTM D150 |
| Arc Resistance | min. 120 | sec | ASTM D495 |
| Volume Resistivity (50% Rh) | min. 10 | Ohm-cm | ASTM D257 |
Regulatory & Compliance
- Certifications & Compliance