Products

Focus Nilfoam 130 is an excellent general purpose defoamer. It is completely silicone-free. Although Focus Nilfoam 130 is a mineral oil based product, it is dispersible in water.

Focus Base 422 is a premium oil-soluble emulsifier package. It can be used to emulsify hydro-treated base oils like Group I and Group II oils. It is sodium sulfonate-free with a unique surfactant system. This base provides hard waters table emulsions with excellent corrosion protection.

Focus Amide 5 is a oil-soluble, water-dispersible alkanolamide.

Focus Nilfoam 250 is a highly efficient organo-silicone defoamer. This product can be used both in the concentrate or tankside when diluted in water (~10:1).

Focus Base PS 12 is a cost effective, soluble oil emulsifier base package designed for use in both naphthenic and paraffinic oils. It can be used to formulate both soluble oils and semi-synthetic metalworking fluids. Focus Base PS 12 is formulated with a sodium sulfonate/succinic anhydride primary emulsion system and gives improved hard water stability and good rust protection with cleanliness. It assists in the prevention of soap and sludge build-up in sumps, reducing corrosion and microbiological problems. Focus Base PS12 does not contain chlorine, free sulfur, nitrites, phenols or heavy metals.

Focus Nilfoam 160 is a highly effective modified organo-siloxane defoamer. It has a broad solubility and compatibility range in various metalworking fluid types.

Focus InhibitR AL is a multifunctional phosphate designed for use in water-reducible metalworking fluids. This additive provides excellent corrosion inhibition properties when machining aluminum alloys. It can also deliver outstanding EP properties to improve a fluid’s lubrication performance.

Focus Nilfoam 270 is a highly efficient organo-silicone defoamer. This product can be used both in the concentrate or tankside when diluted in water (~10:1).

Focus Base 10 is a soluble oil emulsifier package designed to emulsify naphthenic oils with aniline points between 160°F and 180°F. Higher treat levels with Focus Base 10 provide greater emulsification and rust protection under more demanding conditions. Focus Base 10 provides good emulsion stability in both soft and hard waters. This product is compatible with extreme pressure additives such as chlorinated paraffins, sulfurized products and esters used to formulate heavy duty soluble oils. Focus Base 10 does not contain chlorine, free sulfur, nitrites, phenols or heavy metals.

Focus Nilfoam 180 is an economical general purpose defoamer. It is completely silicone-free. Although Focus Nilfoam 180 is a mineral oil based product, it is dispersible in water.

Focus Nilfoam 220 is a highly active defoamer based on organo-silicone. It has exceptional dispersibility properties in metalworking fluid concentrates.

Focus RP RZ8 is a very cost effective water-soluble corrosion inhibitor additive designed to impart temporary rust protection for ferrous and non-ferrous applications. It does not contribute to discoloration on the surface of non-ferrous metals. It imparts lubrication properties when used at higher concentrations. It is designed to have a relatively low pH and high acid content, which provides the ability to formulate fluid concentrates with a variety of alkaline sources. Focus Additive RP RZ8 is non-foaming and has excellent stability in hard water up to 1500 ppm hardness. Focus Additive RP RZ8 gives rust protection when water evaporates. The thin liquid film that remains provides rust protection to ferrous surfaces, even under high humidity conditions. This film can easily be removed by rinsing with water. It also burns off cleanly in high temperature processing operations. Focus Additive RP RZ8 is composed of a mixture of organic acid salts, is DEA free and can be waste treated by adjusting the pH below the methyl orange end point.

Focus Base P-20 is an emulsifier base with polyisobutylene succinic anhydride (PIBSA) as the primary emulsifier in place of natural and synthetic sodium sulfonate. It is designed for use in both paraffinic and naphthenic base oils.

Focus RP 25C is a low foaming water soluble corrosion inhibitor. It is based on organic acids and is neutralized with amines. Designed for use in water based synthetic metalworking fluids and cleaners, Focus RP 25C is compatible with most synthetic water based metalworking additives, such as polyalkylene glycols.

Focus InhibitR 1000 is a high performance, water-soluble corrosion inhibitor for cast iron and steel alloys. It is formulated using a unique mixture of organic acid salts. Focus InhibitR 1000 is very low foaming and has excellent hard water stability. This product does not contain any nitrates/nitrites, boron, or secondary amines.

Focus RP 45C is a low foaming, water-soluble corrosion inhibitor for use on cast iron and steel alloys. It has exceptional hard water stability, is based on organic acids and is neutralized with amines. Designed for use in water based synthetic metalworking fluids, water-based hydraulic fluids and cleaners, Focus RP 45C is compatible with most synthetic water-based metalworking additives, like polyalkylene glycols, surfactants, pH builders, etc.

Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex. Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex. Focus RP 30 is a water-soluble, oil-dispersible succinic ester/boron complex.

Focus RP 10 is a water-soluble, boron-containing corrosion inhibitor. Focus RP 10 is designed for use as a low foam corrosion inhibitor for aqueous systems. It provides high reserve alkalinity to formulate metalworking fluids and cleaners.

Focus RP 35 is a complex multifunctional ester containing high boron. The product has excellent lubricating properties. It also functions as a co-emulsifier and lubricity additive in both aqueous and oil-based systems. Due to the nature of molecule and high boron content, it can be used to formulate soluble oils and semi-synthetic metalworking fluids that are less susceptible to bacterial attack.