Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Low warpage
- Easy flow and fast solidification
- Good dimensional stability
- High mechanical properties
- Excellent dimensional stability
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
Textile pulleys
Air conditioner fans
Impellers
Motor casing
Speedometer housing for OTR
vehicles
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Stress | 65.0 | % | D638 |
| Elongation at Break | 3.0 | MPa | D638 |
| Flexural Stress | 90.0 | MPa | D790 |
| Flexural Modulus | 5500.0 | kg.cm/cm | D790 |
| Izod Impact Strength Notched | 7.0 | - | D256 |
| He(Deflection Temp (18.5 kg/cm² load) | 102.0 | °C | D648 |
| Specific Gravity | 1.2 | - | D792 |
| Shrinkage Parallel | 0.1to 0.3 | % | D955 |
| Melt Flow Index | 8.0 | g/10mins | D1238 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
FORMPOLY ABSGF20 is supplied in 25 Kgs dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 80°C for 2 to 3 hours for good surface finish.