Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Higher Impact resistance
- Reduced sensitivity to notch
- Good finish and Gloss
- UV Stabilized
- Easy flow and fast solidification
- Low density
- Good fatigue behavior
- High resistance to stress cracking
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- OFC Sheathing
- Pneumatic tubing
- Air break tubing
- Cable sheathing
- Noiseless Gear/clips
- Heater Wire insulation
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Strength | 120.0 | MPa | ISO 527 |
Elongation at Break | 6.0 | % | ISO 527 |
Tensile Modulus | 6500.0 | MPa | ISO 527 |
Flexural Strength | 160.0 | MPa | SO178 |
Flexural Modulus | 6000.0 | MPa | ISO 178 |
Izod Impact Strength-Notched | 23.0 | kg cm/cm | ISO 180 |
Density | 124.0 | g/cm³ | ISO 1183 |
Moisture absorption | 0.6 | % | ISO 62 |
Water Absorption | 11.0 | % | ISO 62 |
Mould Shrinkage-Flow | 0.3-0.5 | % | FPL |
Mould Shrinkage-Across Flow | 0.8-10 | % | FPL |
Flammability (3mm) | HB | — | UL94 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing
It can be processed in extruders with min L/D of 24 with compression ratio of 3.0 to 3.5.Material can be processed with zone temperature from 210 °C to 230 °C.
- Processing Parameter
ZONE 1 190-200°C ZONE 2 190-200°C ZONE 3 190-200°C ZONE 4 200-215°C Flange1 200-215°C Flange 2 200-215°C Die 215-230°C Vacuum 0.1-0.2 bar Water Temperature 15-25°C
Packaging & Availability
- Packaging Type
- Packing
It is supplied in 25 Kgs. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre-dry the material at 80 C for 2 to 3 hours for good surface finish.