Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Excellent Electrical Conductivity
- Lubricated and heat stabilized
- High mechanical properties
- Excellent dimensional stability
- Good surface finish
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- Engine Covers
- Oil Filter Parts
- Clutch Rings
- Connectors
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Stress | 140.0 | MPa | D638 |
Elongation at Break | 4.0 | % | D638 |
Tensile Modulus | 6000.0 | MPa | D638 |
Flexural Modulus | 5600.0 | MPa | D790 |
Izod Impact Strength Notched | 5.0 | kg cm/cm | D256 |
He(Deflection Temp (18.5kg/cm load) | 270.0 | °C | D648 |
Volume Resistivity | 1.00E+14 | Ohm-cm | D257 |
Specific Gravity | 1.29 | - | D792 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
It is supplied in 25 Kgs. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 100ºC for 4 to 5 hours for good surface finish.