Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Easy flow and Fast solidification.
- Good Chemical resistance
- Available in variable colors
- Easy flow fast solidification
- Fine crystalline structure
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Application
- Locknut fasteners
- Motor insulation parts
- Terminals/Connectors
- Electrical Knobs
- Fuse Box
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Stress | 80.0 | MPa | D638 |
| Elongation at Break | 30.0 | MPa | D638 |
| Flexural Stress | 110.0 | % | D790 |
| Flexural Modulus | 2800.0 | Mpa | D790 |
| Izod Impact Strength Notched | 6.0 | J/m | D256 |
| He(Deflection Temp (4.6 kg/cm² load) | 150.0 | °C | D648 |
| He(Deflection Temp (18.5 kg/cm² load) | 75.0 | °C | D648 |
| Specific Gravity | 1.14 | — | D792 |
| Shrinkage | 1.5-1.8 | Ohms-cm | D-257 |
| Volume Resistivity | 1.00E+16 | Ohm-cm | D-257 |
| Surface Resistivity | 1.0e+15 | — | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
It is supplied in 25 Kgs. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 100ºC for 2 to 3 hours for good surface finish.