Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Extended UV stability
- Excellent chemical resistance
- Excellent gloss and surface finish
- Good weathering resistance
- Good dimensional stability
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- Cable sheathing
- Electrical switches & Knobs
- Plugs / Sockets
- Trolley wheels
- Safety helmets
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tensile Stress | 80.0 | % | D638 |
Elongation at Break | 30.0 | MPa | D638 |
Flexural Stress | 115.0 | MPa | D790 |
Flexural Modulus | 3000.0 | kg.cm/cm | D790 |
Izod Impact Strength Notched | 6.0 | — | D256 |
He(Deflection Temp (4.6 kg/cm² load) | 140.0 | °C | D648 |
He(Deflection Temp (18.5 kg/cm² load) | 70.0 | °C | D648 |
Specific Gravity | 1.14 | — | D792 |
Shrinkage | 1.5-2.0 | % | D955 |
Relative viscosity | 2.8 | — | D2857 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
It is supplied in 25 Kgs. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 100ºC for 2 to 3 hours for good surface finish.