Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Features
- Higher Impact resistance
- Reduced sensitivity to notch
- Good finish and Gloss
- Easy flow and fast solidification
- High elongation
- Low density
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- Handle bar
- Rifle butt
- Terminals/Connectors
- Cable sheathing
- Helmet
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Stress | 42.0 | MPa | D638 |
| Flexural Stress | 63.0 | MPa | D790 |
| Flexural Modulus | 1500.0 | MPa | D790 |
| Izod Impact Strength Notched | 77.0 | kg cm/cm | D256 |
| He(Deflection Temp (4.6 kg/cm² load) | 100.0 | °C | D648 |
| Specific Gravity | 1.06 | - | D792 |
| Shrinkage | 1.5-1.8 | % | D955 |
| Volume Resistivity | 1.00E+16 | Ohm-cm | D-257 |
| Surface Resistivity | 1.0e+15 | Ohms | D-257 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
It is supplied in 25 Kgs. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 100ºC for 2 to 3 hours for good surface finish.