Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Features
- High heat resistance
- Low warpage
- Good surface finish
- Easy flow and fast solidification
- Easy processability
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- Electrical meter parts
- Automotive lgnitions
- Motor housing
- Ampere meter parts
- Flow regulators
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Stress | 80.0 | MPa. | D638 |
| Elongation at Break | 3.0 | % | D638 |
| Flexural Stress | 130.0 | MPa | D790 |
| Flexural Modulus | 5000.0 | MPa. | D790 |
| Izod Impact Strength Notched | 20.0 | Kg cm/cm | D256 |
| He(Deflection Temp (18.5 kg/cm² load) | 130.0 | °C | D648 |
| Specific Gravity | 1.24 | - | - |
| Shrinkage | 0.2-0.4 | % | D955 |
| Water absorption at Equilibrium | 0.1 | % | D570 |
| Vicat VST/B/120 | 140.0 | C | DI525 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
FORMPOLY" PPOGF20 is supplied in 25 Kg. dry, ready to mold, in sealed bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 80°C for 1 to 2 hours for good surface finish.