Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Features
- Meets UL-94 VO Requirements
- Warpage Free
- High heat resistance
- Low moisture absorption
- Easy flow and fast solidification
- Easy processability
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Application
- Internal switch housings
- Telecommunication connectors
- Deflection yokes
- Bobbins
- TV Parts
Properties
- Flame Rating
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Tensile Stress at Yield | 75.0 | MPa. | D638 |
| Tensile stress at break | 65.0 | MPa. | D638 |
| Elongation at Break | 5.0 | % | D638 |
| Flexural Stress | 110.0 | MPa. | D790 |
| Flexural Modulus | 2750.0 | MPa. | D790 |
| Izod Impact Strength Notched | 20.0 | Kg cm/cm | D256 |
| He(Deflection Temp (4.6 kg/cm² load) | 155.0 | °C | D648 |
| He(Deflection Temp (18.5 kg/cm² load) | 140.0 | °C | D648 |
| Specific Gravity | 1.1 | — | D792 |
| Dielectric strength | 19.5 | kV/mm | D149 |
| Flammability | V0 | — | UL94 |
| Vicat VST/B/120 | 160.0 | °C | DI525 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packing
FORMPOLY SPPOFR90HH issupplied in 25 Kg. dry, ready to mold, in sedled bags to prevent the uptake of moisture.
Storage & Handling
- Pre-Drying
FPL grades can normally be taken for direct processing. However, in case the material is exposed to atmosphere, it is advisable to pre- dry the material at 80°C for 1 to 2 hours for good surface finish.