company tower banner
Forsch Polymer Company Logo

Forsch Polymer ISO 800A

ISO 800A is a one-part dark brown binder-adhesive for bonding dark rubber granules to a variety of substrates such as foam, concrete, fiberglass, wood, and so on. Surfaces produce a non-slip, pond-free, soft floor decking.

Product Type: 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Concrete, Elastomers & Rubbers, Fiberglass, Wood

Chemical Family: Polyurethanes (PU)

Safety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Composition

A mixture of organic polymers and resins.

Features & Benefits

Applications & Uses

Compatible Substrates & Surfaces
Diluents

Toluene, glycol ether solvents, MEK

Surface Preparation

To ensure consistent bonding results, surfaces must be thoroughly cleaned prior to application of the binder/rubber. Protective oils, cutting oils, greases, etc. are removed by solvent degreasing. Scale or tightly adherent coatings are removed by suitable mechanical, sandblast or chemical cleaning methods.

Application

PRIMER 1050 may be applied to the cleaned substrate to ensure ultimate adhesion to a wider variety of substrights. Thoroughly mix ISO 800A and rubber at a ratio of approximately 1 part ISO 800A to 5 parts rubber. Apply mixture generously and mat or stamp down to obtain desired density and surface finish. Allow at least 24 hrs prior to foot traffic.

Properties

Specifications
ValueUnitsTest Method / Conditions
Viscosity (77°F)3500-4500 cps
% Solids 1.0%
Typical rubber To Binder Ratio 5 to 1
Coverage * (1" Thick)4.5lbs/sq ft
Weight/Gallon 9.00 - 9.20lbs.
Tack Free Time (50% RH) 2 - 3hours
Note

* Data is typical and not to be used for specification purposes. Coverage is calculated at 3.80 lbs rubber to .70 lbs binder.

Storage & Handling

Shelf Life

Shelf Life from date of shipment, unopened container, 70 - 80 Deg F storage, 6 Months