Fosroc Inc.

About Us

"Fosroc is a world leader in manufacturing and supplying high performance chemicals for the construction industry. We deliver complete constructive solutions for all project needs. Fosroc India is a 100% privately owned subsidiary of Fosroc International Limited UK, a division of JMH Group, with over 80 years of experience worldwide. Fosroc India has over four decades of pioneering experience in providing Constructive Solutions and serving customers in the construction industry across the country. We have state-of-the-art manufacturing facilities in Bangalore (Karnataka), Ankleshwar (Gujarat), Kolkata (West Bengal) and Keshwana (Rajasthan), with a wide network of sales and marketing offices in all metropolitan areas and leading cities in India, supported by mix design and specification experts, regional technical service specialists and regional concrete laboratories. Fosroc’s corporate and registered offices are based in Bangalore."

Browse Products by Technology

View All Products

Ready-to-Use Products

12 products

Browse Products by Market

View All Products

Building & Construction

12 products

Industrial

4 products

Automotive & Transportation

1 product

Most Viewed Products

View All Products

Nitoseal® PE290

Ready-to-Use Product Type:3K Sealant
Compatible Substrates & Surfaces:Concrete, Metal, Masonry, Asphalt, Steel
Chemical Family:Polyesters

Nitoseal® PE290 three-component flexibilised polyester based sealant cures to form a tough resilient seal with a limited degree of movement. The material is self leveling and can be poured or gunned directly into horizontal slots. Nitoseal® PE290 will adhere to both concrete and asphalt surfaces that have been well prepared whether dry or damp.

Nitoseal® MS300

Ready-to-Use Product Type:1K (1 component) Sealant
Chemical Family:Silyl-modified Polymers (SMP)

Nitoseal® MS300 is a one part, high modulus sealant based on hybrid silyl modified polyether technology. It has a rapid rate of cure and forms a tough elastomer capable of supporting heavy wheel loads. Nitoseal® MS300 may be applied between 6mm and 20mm wide, for internal trafficked flush joints and up to 40mm wide, for non-trafficked / recessed trafficked joints. In most cases it is recommended to form a sealing slot with a square cross- section, subject to a minimum 10mm depth. To ensure the sealant operates within its stated movement accommodation capacity the sealing slot widths should be designed in accordance with the recommendations of BS6093.

Nitoseal® MB150

Ready-to-Use Product Type:1K (1 component) Sealant

Nitoseal MB150 is a hand applied putty for vertical or inclined joints in water retaining structures.

Nitoseal® MS100

Ready-to-Use Product Type:1K (1 component) Sealant
Application Area:Acoustic Barrier
Compatible Substrates & Surfaces:Concrete, Masonry, Marble
Chemical Family:Silyl-modified Polymers (SMP)

Nitoseal® MS100 is a tough, durable elastomeric joint sealant. It is based upon hybrid silyl modified polyether technology. It is suitable for use over a wide range of external and internal building applications and has excellent weather resistance. Nitoseal® MS100 has excellent primer-less adhesion to a wide range of common building substrates and does not stain concrete, marble and other masonry surfaces.

Nitoseal® MS60

Ready-to-Use Product Type:1K (1 component) Sealant
Application Area:Acoustic Barrier, Universal Joints
Chemical Family:Silyl-modified Polymers (SMP)

Nitoseal® MS60 is a one part, low modulus sealant based on hybrid silyl modified polyether ("MS") technology.

Nitoseal® PU220

Ready-to-Use Product Type:2K (2 component) Sealant
Application Area:Tanks
Chemical Family:Polyurethanes (PU)

Nitoseal® PU220 is a two part polyurethane formulation which is blended with high grade pitch which cures to form elastomeric, highly resilient seals with excellent recovery properties. It does not exhibit the characteristic disadvantages of conventional bituminous or tar based compounds such as embrittlement, thermo-plasticity and cold flow tendencies. Cured Nitoseal® PU220 seals are watertight and highly resistant to weathering and aging. Nitoseal® PU220 is supplied as a black, gun grade sealant suitable for both vertical and horizontal joints.

Nitoseal® PU220PF

Ready-to-Use Product Type:2K (2 component) Sealant
Application Area:Tanks
Chemical Family:Polyurethanes (PU)

Nitoseal PU220PF is suitable for use in sewage treatment works, petrochem storage tanks, sea water intakes and sea walls, subject to tidal conditions. It is a bio-degradation resistant sealant.

Thioflex 600

Ready-to-Use Product Type:2K (2 component) Sealant
Compatible Substrates & Surfaces:Aluminum, Metal, Stainless Steel, Concrete, Glass, Masonry
Chemical Family:Polysulfides

Thioflex 600 is particularly recommended for use in high-rise buildings and other applications where access for subsequent maintenance will be difficult and the risk of early movement failure must be minimized. It is also suitable for sealing joints in brickwork, retaining walls, basements and subways. Thioflex 600 is available in gun and pouring grades. The gun grade is ideal for general application. It is packed in a ready to mix, 2.5 liter tin containing the base and curing agent in the correct proportions. The pouring grade for joints in horizontal surfaces is supplied in 5 liter packs with the base and curing agent in separate tins. Thioflex 600 pouring grade is recommended for initial sealing of expansion joints and stress relief joints in floors and sealing other horizontal surfaces.

Nitoseal® MS600

Ready-to-Use Product Type:1K (1 component) Sealant
Application Area:Tanks, Bridges

Nitoseal® MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer.

View All Products (12)

View All Products