Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Base Chemicals Functions
- Technologies
- Product Families
Features & Benefits
- Product Attributes
Galaxy MW 252 is a non-ionic surface active agent derived from natural fatty alcohols.
Applications & Uses
- Markets
- Applicable Processes
- Base Chemicals End Uses
- Product Applications
Galaxy MW 252 is mainly used as an intermediate for synthesis of anionic surfactants like alkyl ether sulfates.
Properties
- Physical Form
- Appearance
- Clear to slightly hazy liquid, colourless to pale yellow
- Odor
- Characteristic
- Specifications
Value | Units | Test Method / Conditions | |
Color (at 35°C) | max. 25 | APHA | — |
pH (1% in distilled water) | 6.0 - 8.5 | — | — |
Moisture Content | max. 0.1 | % by mass | — |
Hydroxyl Value | 196 - 202 | mg KOH/g | — |
PEG Content | max. 1.0 | % by mass | — |
Solidification Point | 5 - 9 | °C | — |
Specific Gravity (at 20°C) | 0.887 - 0.897 | — | — |
Chemical Formula | RO(CH₂CH₂O)nH | — | — |
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, rinse immediately with plenty of water and seek medical attention, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy MW 252 is available in 235 litres HMHDPE carboys. Total of 80 carboys i.e. 16.8 MT (210 kg per carboy) can be shipped either palletized or non-palletized in 20 ft. full container load. It can be supplied in IBC (1 MT). Total of 18 IBC i.e. 15.3 MT (850 kg per IBC) can be shipped in 20 ft. full container load. 20 - 22 MT of Galaxy MW 252 can be supplied in 24 MT ISO Tank. In India, 20 - 39 MT of Galaxy MW 252 can be supplied in 20-40 MT Road Tanker.
Storage & Handling
- Shelf Life
- 2 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 30 - 40°C away from direct heat, sunlight and moisture.
- Keep the container tightly closed after use, as the product is hygroscopic in nature.
- Once carboy / IBC is opened, consume the product within a week.
- When taken in ISO container, it is recommended that material be consumed within one month’s time, after unloading in storage tank.
- In original sealed container, when stored as suggested, shelf life of the product is at least two years.
- If the material is stored below 15°C, then it may become hazy or semi - solid.
- If the product becomes frozen in IBC / HMHDPE carboys then keep the same in hot room of 50°C for around 2 days.
- It is recommended to heat the ISO tanks with hot water jacket of 70 - 80°C (4 - 8 hours) or low pressure steam (< 2 kgs / cm2 ) to bring the temperature of the product to 30 - 40°C.
- Avoid direct heating.
- Heating time may vary.
- Once it is in molten stage, mix it properly to make it uniform before use.
- If material is not melted properly / not uniform, there is a possibility of improper sampling.
- Avoid part quantity use.
- It can also be stored in a clean and dry SS storage tank.
- During storage, stacking should be maximum 1+1 carboys (palletized / non - palletized) / IBC