Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- Base Chemicals Functions
- Cleaning Ingredients Functions
Features & Benefits
- Labeling Claims
- Base Chemicals Features
- HII Features
- Product Attributes
Galaxy MW 258 is a non-ionic surface active agent derived from natural fatty alcohols. It exhibits good wetting, emulsifying, detergent and low foaming properties.
Applications & Uses
- Markets
- Applications
- Applicable Processes
- Base Chemicals End Uses
- Home Care Applications
- I&I Cleaning Applications
- Product Applications
Galaxy MW 258 can be used:
- As a basic surfactant for liquid detergents, machine dish washes, household cleaners, metal cleaners and hand cleaners
- As an emulsifying agent
- In wetting agents, dispersants, emulsion stabilizers, sanitizers and defoaming agents
- As an intermediate for synthesis of anionic surfactants like alkyl ether carboxylates
Properties
- Physical Form
- Appearance
- Clear to hazy liquid, colourless to pale yellow
- Odor
- Characteristic
- Specifications
Value | Units | Test Method / Conditions | |
Color (at 35°C) | max. 25.0 | APHA | — |
pH (1 % aqueous solution) | 6.5 - 9.0 | — | — |
Moisture Content | max. 0.3 | % by mass | — |
PEG Content | max. 3.0 | % by mass | — |
Cloud Point (1% aqueous solution) | 59 - 63 | °C | — |
Specific Gravity (at 35°C) | 0.980 - 0.995 | — | — |
Solubility (5 % solution in distilled water) | Completely soluble | — | — |
Chemical Formula | RO(CH₂CH₂O)nH | — | — |
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy MW 258 is available in 235 litres HMHDPE carboys. Total of 80 carboys i.e. 18 MT (225 kg per carboy) can be shipped either palletized or non-palletized in 20 ft. full container load. It can be supplied in IBC (1MT). Total of 18 IBC i.e. 17.1 MT (950 kg per IBC) can be shipped in 20 ft. full container load. 22.5 MT of Galaxy MW 258 can be supplied in 24-25 MT ISO Tank. In India, 20 - 39 MT of Galaxy MW 258 can be supplied in 21-40 MT jacketed Road Tanker.
Storage & Handling
- Shelf Life
- 2 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 30 - 40°C away from direct heat, sunlight and moisture.
- Keep the container tightly closed after use and if not stored properly; it can lead to increase in moisture content of the product as the product is hygroscopic in nature.
- Once carboy / drum / IBC is opened, consume the product within a week.
- When taken in ISO container / Jacketed tanker, it is recommended that material be consumed within one month’s time after unloading in storage tank.
- In original sealed container, when stored as suggested, shelf life of the product is at least two years.
- If the material is stored below 30°C, then it may become hazy or semi - solid.
- If the product becomes frozen in IBC / HMHDPE carboys / drums, then keep the same in hot room of 50°C for around 2 days.
- It is recommended to heat the ISO tanks / Jacketed tanker with hot water jacket of 70 - 80°C (4 - 8 hours) or low pressure steam (< 2 kgs / cm2 ) to bring the temperature of the product to 30 - 40°C.
- Avoid direct heating.
- Heating time may vary.
- Once it is in molten stage, mix it properly to make it uniform before use.
- If the material is not melted properly / not uniform, there is possibility of improper sampling.
- Avoid part quantity use.
- It can also be stored in a clean and dry SS storage tank.
- During storage, HMHDPE carboys (palletized / non - palletized) / IBC should not be stacked one above the other