Knowde Enhanced TDS
Identification & Functionality
- Carrier
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- Product Features
- Galaxy™ SN 8182 differ from fatty acid based soaps in many ways:
- Syndet formulation with mild, natural based anionic surfactants
- Perfectly balanced formulation to impart optimal lathering characteristics and skin
- moisturization
- Formulation based on Sodium Coco-Sulfate, Potassium Lauryl Sulfate, Fatty acid soap, etc.
- Contain additional emollients and conditioners to enhance skin feel
- Compatible with pharmaceutical and cosmeceutical additives
- Milder to skin
- Fragrance - friendly base
- Proven easy process ability (processing similar to conventional soaps)
Applications & Uses
- Markets
- Bath & Shower Applications
- Skin Care Applications
- Applications
Typical formulation for final syndet bar using Galaxy™ SN 8182:
- Galaxy™ SN 8182 : 95 parts
- Additives / other ingredients : 2 parts
- Water : 2 parts
- Perfume : 1 part
- Color : As per need
- Total : To 100
Mixing: Galaxy™ SN 8182 noodles are loaded into an amalgamator. A high mixing efficiency should be obtained by sigma mixer or mixer kneader. Add given quantity of special additives or ingredients, water, perfume and color and blend thoroughly in the mixer. The mixing time can vary based on the special ingredients to be mixed. This time is determined experimentally.
Refining: Refining can be done by passing above mass through various line arrangements, such as refiner and roll mill. The refining unit should be provided with cooling water circulation. The temperature of the cooling water can be maintained at room temperature for most of the formulations. However, some specific formulations may need chilled water. The refiner should be fitted with a coarse refining screen and the mass is fed at about 36 - 40°C.
Extruding: When extrusion / finishing lines use duplex vacuum plodders for final refining and air free extrusion of syndet bars, the exit temperatures of the extruded mass leaving the first plodder and the final plodder have to be between 35 - 40°C and 40 - 50°C respectively. The temperature of the body of the first and second plodder should be maintained between 15 - 25°C. The extrusion head temperature has to be kept between 50 - 65°C, depending upon the size and design of the head.
Properties
- Physical Form
- Appearance
- White to off-white noodles
- Odor
- Characteristic
- Compatible with
- Pharmaceutical additives, Cosmeceutical additives
- Specifications
| Value | Units | Test Method / Conditions | |
| pH (2% aqueous solution) | 7.2 - 8.2 | — | — |
| Active Matter (mol.wt. 371) | min. 42 | % by mass | — |
| Moisture Content | max. 7.0 | % by mass | — |
| Total Fatty Matter | min. 40 | % by mass | — |
Safety & Health
- Safety Information
- Spills should be contained / collected and disposed off as per the regulations.
- Avoid ingestion and direct inhalation (where air concentration is high, appropriate mask is suggested).
- Avoid contact with eyes, skin and clothing. In case of contact with eyes, seek adequate and timely medical attention.
- During storage, maximum 7 bags (non-palletized) can be stacked and pallets 1+1.
Packaging & Availability
- Packaging Type
- Packaging Information
- Galaxy™ SN 8182 is available in HDPE paper bags of 25 kg net wt. 28 bags are packed on one pallet.
- Palletized 14 MT material can be shipped in one full 20 ft. container.
Storage & Handling
- Shelf Life
- 1 year
- Storage and Handling Conditions
- Keep the material in a clean dry place, away from heat and direct sunlight. Store below 35°C.
- Keep the bags tightly closed. In original sealed containers, the product can be stored for at least 1 year.