Knowde Enhanced TDS
Identification & Functionality
- Carrier
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
Features & Benefits
- Benefit Claims
- Labeling Claims
- Product Features
- Contains no animal derived ingredients
- Natural skin pH
- Contains dead sea salt for perceived therapeutic benefits
- Enriched with additional emollients and super fatting agents to enhance skin feel
- Excellent hard water tolerance
- Compatible with wide range of specialty ingredients
- Ease in processing
- Biodegradable and environment friendly
Applications & Uses
- Markets
- Bath & Shower Applications
- Applications
- Syndet bars for sensitive skin
- Medicated Syndet bars
Typical formulation for final syndet bar using Galaxy™ SN 8245:
- Galaxy™ SN 8245 : 95 parts
- Additives / other ingredients : 2 parts
- Water : 2 parts
- Perfume : 1 part
Mixing: Charge Galaxy™ SN 8245 granules into sigma mixer and crush it. Add given quantity of special additives and ingredients like water, perfume, color, etc. and blend thoroughly in the sigma mixer. Once mixing is complete unload the sigma mixer and transfer the material for refining
Refining: Pass the blended material through series of simplex refiner and three roll mill for further homogenization. The refiner should have cool water circulation in jacket which is maintained at room temperature and it should be fitted with coarse refining screen
Extruding: Once refining is done, pass the material through duplex vacuum plodder for final air free extrusion to syndet bar or billet which can be further stamped on stamping machine. For smoother extrusion cool water circulation in jackets of plodder is recommended and the extrusion head temperature should be kept between 50 - 65°C depending upon the size and design of the head
Properties
- Appearance
- White to off-white granules
- Odor
- Characteristic
- Compatible with
- Specialty ingredients
- Specifications
| Value | Units | Test Method / Conditions | |
| pH (2% aqueous solution) | 5 - 6 | — | — |
| Active Matter (mol.wt. 356) | min. 42 | % by mass | — |
| Moisture Content | max. 7 | % by mass | — |
| Sodium Chloride Content | max. 3 | % by mass | — |
Safety & Health
- Safety Information
- Spill should be contained / collected and disposed off as per the regulations.
- Avoid ingestion and direct inhalation (when concentration in air is high, use appropriate mask).
- Avoid contact with eyes, skin and clothing. In case of contact with eyes, seek adequate and timely medical attention.
Packaging & Availability
- Packaging Information
- Galaxy™ SN 8245 is available in HDPE lined paper bags of 30 kg net wt.
- Total of 560 bags i.e. 16.8 MT can be shipped palletized in 20 ft. full container load
Storage & Handling
- Shelf Life
- 1 year
- Storage and Handling Conditions
- Store the material in a clean and dry place preferably at < 40°C away from direct heat and sunlight.
- Keep the bags tightly closed. Do not use hooks for handling bags.
- Do not expose the material to higher temperature for prolonged period.
- In original sealed bags, when stored as suggested, shelf life of the product is at least one year.
- Slight pH drop is possible over prolonged storage.
- In case of drop in pH, it is fairly safe to use the material as long as the pH is ≥ 5.0. Soft, easily breakable agglomerates may be formed at the bottom layer of the bags.
- Since the material is hygroscopic in nature, use the product within a week after opening the bag.
- During storage, maximum 8 bags (non-palletized) can be stacked and for palletized, place single pallet on ground or in rack