Knowde Enhanced TDS
Identification & Functionality
- INCI Name
- Ingredient Origin
- Cosmetic Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Product Attributes
Galaxy SN 931 P & T differs from fatty acid-based soaps in many ways:
- Vegetable based
- Superior transparency
- Neutral odour - excellent fit for fragrance
- Good foaming profile, even in hard water
- Superior colour stability
- Compatible with wide range of additives
- No volatile alcohol
- Suitable for any mould or slice
Applications & Uses
- Markets
- Bath & Shower Applications
- Manufacturing Process
Steps Involved In Making Transparent Bar:
- Clean the vessel thoroughly and ensure that it is completely cleaned and dried. Brass or aluminium vessel is not recommended
- Charge the vessel with Galaxy SN 931 P & T flakes and with slow mixing, heat the material from 70 - 75°C till it is melted completely. (Caution: Stirring should be slow to avoid foam generation). For heating, low pressure steam or hot water bath is recommended to avoid any water loss. Excessive heating and / or higher temperature may result into loss in transparency and colour
- Make up the water loss if any, by addition of extra water for maintaining transparency of final cake
- Add colour and fragrance as per the requirement. Oil soluble colour can be incorporated by dissolving it in either propylene glycol or fragrance
- Stop mixing and allow the foam / air bubbles to settle
- Pour the material in a suitable mould
- Cool the mould. (Note: Fast cooling by using chilled water enhances transparency). The product would start solidifying at 58 - 60°C. Finish of the bar would depend on quality of the mould
- Remove the solid soap bar from the mould and stamp it. (Note: In manual stamping, smearing the die with a drop of glycerin further enhances transparency)
Properties
- Appearance
- Soft transparent flakes colourless to faint yellow
- Odor
- Characteristic
- Specifications
| Value | Units | Test Method / Conditions | |
| pH (5 % aqueous solution) | 9.0 - 10.5 | — | — |
Packaging & Availability
- Packaging Type
- Packaging Information
Galaxy SN 931 P & T is available in HDPE bags with liner of 30 kg net wt. Total of 480 bags i.e. 14.4 MT can be shipped either palletized or non-palletized in 20 ft. full container load.
Storage & Handling
- Shelf Life
- 1 Year
- Storage & Handling Information
- Store the material in a clean and dry place at < 35°C away from direct heat and sunlight.
- Keep the bags tightly closed.
- Once the bag is opened, ensure airtight closure after usage and use the product within a week.
- In original sealed condition, when stored as suggested, shelf life of the product is one year.
- If stored above 35°C, there is possibility of colour deterioration and lumping. Colour deterioration is irreversible.
- During storage, to avoid lumping, stack maximum 8 bags (non-palletized) and for palletized, single pallet on ground or in rack