Knowde Enhanced TDS
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- Molecular formula
- R-CO-NH-CH₂-COONa (RCO = Cocoyl moiety)
- Technologies
Features & Benefits
- Benefit Claims
- Labeling Claims
- Product Features
- Primary / secondary moisturizing surfactant
- Exceptionally mild and hypoallergenic, non irritating surfactant even at high concentration
- Very soft on the skin
- Generates rich, creamy lather
- Hair and skin conditioning agent
- Improves rinsibility of formulations
- Good surfactant for sulfate-free and EO-free formulations
- Excellent synergism with fatty acids, sodium lauryl ether sulfate to increase foam volume and creaminess
Applications & Uses
- Markets
- Bath & Shower Applications
- Hair Care Applications
- Skin Care Applications
- Applications
Galsoft SCG (GL) is used in wide range of applications such as:
- EO and sulfate / sulfonate free personal care formulations
- Paste type facial cleansers
- Mild shampoos, body washes
- Shaving preparations
- Shower gels
Properties
- Physical Form
- Appearance
- Colorless to pale yellow clear to slightly turbid liquid
- Odor
- Mild, characteristic
- Specifications
Value | Units | Test Method / Conditions | |
Color | max. 200 | — | APHA |
pH (as such) | 10 - 11 | — | — |
Solids Content (at 105°C, 2 hrs) | 29.0 - 31.0 | % by mass | — |
Active Matter | min. 22.0 | % by mass | — |
Sodium Chloride Content | max. 6.0 | % by mass | — |
Free Fatty Acid | max. 2.5 | % by mass | — |
Iron Content | max. 5 | ppm | — |
Arsenic Content | max. 2 | ppm | — |
Lead Content | max. 20 | ppm | — |
Total Viable Count | max. 10 | cfu/ml | — |
Mold Count | max. 10 | cfu/ml | — |
Yeast Count | max. 10 | cfu/ml | — |
Safety & Health
- Safety Information
- Spills should be contained / collected and disposed off as per the regulations.
- Avoid ingestion, contact with eyes and prolonged contact with skin and clothing.
- In case of contact with eyes, seek adequate and timely medical attention.
- Stacking should be maximum 1+1 for 200 and 235 litres carboys.
Packaging & Availability
- Packaging Type
- Packaging Information
- Galsoft SCG (GL) is available in 235 litres HMHDPE carboys.
- Total of 80 carboys i.e. 18.8 MT can be shipped either palletized or non-palletized in 20 ft. full container load.
- It is available in 200 litres HMHDPE carboys.
- Total of 80 carboys i.e. 16 MT can be shipped either palletized or non- palletized in 20 ft. full container load.
- It is available in 50 litres HMHDPE carboys.
- Total of 360 carboys i.e. 18 MT can be shipped either palletized or non-palletized in 20 ft. full container load.
- It is available in IBC (1 MT capacity).
- 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load. It can also be supplied in ISO tanks.
Storage & Handling
- Storage and Handling Conditions
- Store the material in a clean, dry place at 25 - 35°C away from direct heat and sunlight.
- Keep the containers tightly closed.
- In original sealed containers, when stored as suggested, the shelf life of the product is at least two years.
- Product solidifies, if stored at ≤ 15°C.
- If solidifies, it is recommended to increase the temperature of the product maximum to 55°C by heating the ISO containers with hot water jacket or low pressure steam (< 2 kgs/cm⊃2 ).
- If the product becomes frozen in IBC / HMHDPE carboys, then keep the same in hot room of 30 - 40°C (avoid direct heating).
- Post melting to liquid, entire mass has to be made homogenous before use.