Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- INCI Name
- Cleaning Ingredients Functions
- Cosmetic Ingredients Functions
- Molecular formula
- R-CO-N(CH₃)-CH₂-CH₂-SO₃Na (RCO = C₁₂-₁₈, C₁₈ unsaturated)
- Technologies
Features & Benefits
- Benefit Claims
- HII Features
- Product Features
- It is a perfect anionic surfactant and compatible with various anionic and non - anionic surfactants, with high foaming ability.
- It has superior washing, moisturizing, emulsifying and softening effect, no irritation to skin, thus can be used to prepare shampoos, shower lotions, facial washes and all kinds of detergents.
Applications & Uses
- Markets
- Applications
- Baby Care Applications
- Bath & Shower Applications
- Hair Care Applications
- Home Care Applications
- Oral Care Applications
- Personal Hygiene Applications
- Skin Care Applications
Properties
- Physical Form
- Solubility
- Appearance
- White to off-white pearlescent paste (at 25°C), Clear viscous liquid (above 50°C)
- Odor
- Characteristic
- Compatible with
- Non-ionic surfactants, Anionic surfactants
- Specifications
Value | Units | Test Method / Conditions | |
pH (10% aqueous solution at 25°C) | 7.5 - 8.5 | — | — |
Solids Content (at 140°C, 1 hr) | 38.0 - 43.0 | % by mass | — |
Active Matter | 30.0 - 31.5 | % by mass | — |
Salt Content (as NaCI) | 4.0 - 7.5 | % by mass | — |
Free Fatty Acid | max. 3.0 | % by mass | — |
Lead Content | max. 20.0 | ppm | — |
Total Viable Count | max. 100 | cfu/g | — |
Mold Count | max. 50 | cfu/g | — |
Yeast Count | max. 50 | cfu/g | — |
Gram Negative | Absent | cfu/g | — |
Safety & Health
- Safety Information
- Spill should be contained / collected and disposed off as per the regulations.
- Avoid ingestion and contact with eyes, skin and clothing.
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice, if necessary
Packaging & Availability
- Packaging Type
- Packaging Information
- Galsoft SCT 40 (LPH) is available in 220 litres HMHDPE carboys.
- Total of 80 carboys i.e. 16 MT can be shipped palletized or non - palletized in 20 ft. full container load.
- It can be supplied in IBC of 1 MT capacity.
- Total of 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load.
Storage & Handling
- Shelf Life
- 2 years
- Storage and Handling Conditions
- Store the material in a clean, dry place at < 40°C, away from direct heat and sunlight.
- Keep the containers tightly closed.
- Product has tendency to become non-pourable paste < 29°C and solidifies < 23°C but it is pumpable up to 23°C.
- If it solidifies, it is recommended to increase the temperature of the product maximum to 55°C by heating the jacketed ISO containers with hot water or low pressure steam (<1 kg/cm⊃2 ).
- If the product freezes /crystallized in IBC/HMHDPE carboys, then keep the same in hot room at about 50°C (avoid direct heating).
- Slight pH drop is possible over a prolonged storage.
- In case of drop in pH, material is stable and fairly safe to use as long as the pH 5.0.
- Entire mass must be made homogeneous before use.
- Use entire product, once the HMHDPE carboy/IBC is opened.
- In the original sealed condition, when stored as suggested, the shelf life of the product is two years.
- During storage, stacking should be maximum 1+1 for IBC / HMHDPE carboys (palletized and non-palletized)