Knowde Enhanced TDS
Identification & Functionality
- INCI Name
- Cosmetic Ingredients Functions
- Technologies
Features & Benefits
- Benefit Claims
- Labeling Claims
- Product Attributes
- Primary / secondary moisturizing surfactant
- Exceptionally mild and hypoallergenic, non irritating surfactant even at high concentration
- Very soft for the skin
- Generates rich, creamy lather
- Hair and skin conditioning agent
- Improves rinsibility of formulation
- Excellent synergism with Sodium Laureth Sulfate to increase foam volume and creaminess effect
- Good compatibility with other ingredients in toothpaste
Applications & Uses
- Markets
- Bath & Shower Applications
- Hair Care Applications
- Oral Care Applications
- Skin Care Applications
- Product Applications
Galsoft SLG Plus is used in wide range of applications such as:
- Ethylene Oxide and Sulfate/Sulfonate free personal care formulation
- Paste type facial cleanser
- Mild shampoos, body washes
- Shaving preparation
- Shower gel
Properties
- Physical Form
- Appearance
- Clear to slightly turbid liquid, colourless to pale yellow
- Odor
- Characteristic
- Specifications
| Value | Units | Test Method / Conditions | |
| Chemical Formula | CH₃-(CH₂)n-CO-NH-CH₂-COONa | — | — |
| Color | max. 150 | APHA | — |
| Active Matter | 19 - 21 | % by mass | — |
| Viscosity | max. 3500 | mpas | — |
| pH (as such at 25°C) | 10 - 11 | — | — |
| Solids Content (at 140°C, 1 hr) | 24 - 29 | % by mass | — |
| Free Fatty Acid | max. 2.5 | % by mass | — |
| Chloride (as NaCI) | 4.0 - 5.5 | % by mass | — |
| Total Heavy Metals (as Pb) | max. 20 | ppm | — |
| Microbial Count (TVC) | max. 10 | cfu/ml | — |
| Microbial Count (Y/M) | max. 10 | cfu/ml | — |
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Galsoft SLG Plus is available in 200 liters HMHDPE carboys. Total of 80 carboys i.e. 16 MT can be shipped palletized or non-palletized in 20 ft. full container load. It is available in IBC (1 MT capacity). 18 IBC i.e. 18 MT can be shipped in 20 ft. full container load. 22.5 MT of Galsoft SLG Plus can also be supplied in ISO tanks.
Storage & Handling
- Shelf Life
- 2 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 25 - 50°C away from direct heat and sunlight.
- Keep the containers tightly closed.
- In original sealed containers, when stored as suggested, the shelf life of the product is at least two years.
- Use entire product, once the carboy is opened.
- Once IBC is opened, consume the product within a week.
- When taken in ISO tanker, it is recommended that material be consumed within one month’s time, after unloading in storage tank.
- Product solidifies, if stored at ≤ 9°C.
- If it solidifies, it is recommended to increase the temperature of product maximum to 55°C by heating the jacketed ISO tanks with hot water or low pressure steam (< 2 kg/cm2 ).
- If the product becomes frozen in IBC / HMHDPE carboys, then keep the same in hot room of 30 - 40°C (avoid direct heating).
- Post melting to liquid, entire mass has to be made homogeneous before use.
- During storage, stacking should be maximum 1+1 IBC / carboys (palletized / non - palletized).