Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- INCI Name
- CASE Ingredients Functions
- Cosmetic Ingredients Functions
Features & Benefits
- Benefit Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Coating Type
- Product Applications
Phenoxyethanol P10 is used for a wide range of applications including:
- As a preservative in personal care formulations
- As a latex coalescent in water - based architectural and industrial coatings
- As a solvent and plasticizer for nitrocellulose, cellulose acetate, ethyl cellulose and many vinyl, phenolic, alkyd and ester - type resins in water - based coatings
- As a solvent in printing inks
- As an emulsifier to help lower interfacial tension in oil - water emulsions
- As an ingredient in slurrying compounds used to protect metals against corrosion
- As a synergistic component in broad spectrum anti - bacterial agents
- As an additive in paint industry
- As a perfume fixative
Properties
- Physical Form
- Appearance
- Clear, low viscous liquid, colourless
- Odor
- Characteristic
- Specifications
Value | Units | Test Method / Conditions | |
Chemical Formula | C₆H₅O-CH₂CH₂OH | — | — |
Color (5 ¼” cell, on Y+R) | max. 0.5 | Lovibond | — |
pH (1% aqueous solution) | 5.5 - 7.0 | — | — |
Purity | min. 99.5 | % | Gas Chromatography |
Moisture Content | max. 0.2 | % by mass | Karl Fischer |
Phenoxyethoxyethanol | max. 0.5 | % | Gas Chromatography |
Specific Gravity (at 20°C) | 1.105 - 1.110 | — | — |
Refractive Index (at 20°C) | 1.537 - 1.539 | — | — |
Free Phenol | max. 10 | ppm | — |
Safety & Health
- Safety Information
Spill should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with skin, eyes and clothing. In case of contact with eyes, rinse immediately with plenty of water and seek medical attention, if necessary.
Packaging & Availability
- Packaging Type
- Packaging Information
Phenoxyethanol P10 is available in 235 liters HMHDPE carboys. Total of 80 carboys i.e. 20 MT (250 kg per carboy) can be shipped palletized or non - palletized in 20 ft. full container load. It is available in 35 liters HMHDPE carboys. Total of 480 carboys i.e. 16.8 MT can be shipped palletized or non - palletized in 20 ft. full container load. It is also available in 25 liters HMHDPE carboys. Total of 640 carboys i.e. 16 MT can be shipped palletized or non - palletized in 20 ft. full container load. It can be supplied in IBC of 1 / 1.1 MT capacity. Total of 18 IBC i.e. 18 / 19.8 MT can be shipped in 20 ft. full container load.
Storage & Handling
- Shelf Life
- 2.5 Years
- Storage & Handling Information
- Store the material in a clean, dry place at 20 - 40°C, away from direct heat and sunlight.
- Keep the container tightly closed after use.
- Since product is hygroscopic in nature, moisture content may increase if exposed to atmosphere.
- In original sealed condition, when stored as suggested, shelf life of the product is at least 2.5 years.
- Once carboy / IBC is opened, consume the product within a week.
- When taken in ISO container, it is recommended that material be consumed within one month’s time, after unloading in storage tank.
- Product solidifies, if stored below 14°C for prolonged time.
- If solidifies, it is recommended to heat the jacketed ISO containers with hot water or steam with 1.0 - 1.5 kg / cm2 pressure to bring the temperature of product to 30 - 40°C.
- If the product becomes frozen in IBC / HMHDPE carboys then keep the same in hot room of 30 - 40°C (avoid direct heating).
- During storage, stacking should be maximum 1+1 for IBC / HMHDPE carboys (palletized as well as non - palletized).