Polyamid 6 GF 30

Applications & Uses

Processing Information

Pretreatment / drying

Drying temperature in °C: 80 - 100
Drying time in h (Dry air dryer): 2 - 4

• Max. water content during processing is 0.05%.
• For downtimes of 4 hours or more, we recommend lowering the temperature of the dryer by 40°C.

Processing temperature

Melt temperature	5. Tool	4.noze	3.Zone	2.Zone	1.Zone
260°C – 290°C	80°C - 100°C	250°C - 280°C	250°C - 280°C	250°C - 270°C	240°C - 260°C

• Shrinkage behavior according to literature: 0.25 - 1 % (depending on the component geometry and the Litigation).
• The values given are to be understood as guide values for recompounds and may vary depending on the color or filler content vary.

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Charpy Impact Strength (23°C)	60	kJ/m²	ISO 179/1eU
Charpy Impact Strength (23°C)	10	kJ/m²	ISO 179/1eA
Elongation (50mm/min)	3	%	ISO 527-1
Flexural modulus (1mm/min)	7.3	MPa	ISO 178
Tensile Modulus (1mm/min)	7.5	MPa	ISO 527-1
Yield Stress (50mm/min)	150	MPa	ISO 527-1

Typical Properties

	Value	Units	Test Method / Conditions
Density (23°C)	1.36	g/cm³	ISO 1183
Water Absorption (Equilibrium Value, 23°C, 50% r.F.)	2.1	%	ISO 62