company tower banner

Brands

GEHR

9 Brands found on GEHR in Other Devices & Assemblies

GEHR POM banner

Applications:Parts & Components, Medical, Laboratory & Diagnostics
Product Families:Parts, Shapes & Films, Parts & Shapes
Polymer Name:Polyacetal Copolymer (POM)
End Uses:Medical Devices, Medical Device Housings, Conveyors

Due to its good thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior. Since POM belongs to the group of short-chip materials, machining is significantly simplified when compared to similar plastic materials.

GEHR PPS banner

Applications:Building Materials, Parts & Components, Exterior & Body
Product Families:Parts, Shapes & Films, Parts & Shapes
Chemical Family:Polyphenylene Sulfide (PPS)
Polymer Name:Polyphenylene Sulfide (PPS)
End Uses:Automotive Interior Parts, Automotive Components, Pump Parts

Due to its excellent thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of high-performance plastics (HPM).

GEHR PEEK banner

Applications:Semiconductor Manufacturing, Equipment & Parts, Other Industrial Applications
Product Families:Parts, Shapes & Films, Parts & Shapes
Chemical Family:Polyether Ether Ketone (PEEK)
Polymer Name:Polyetheretherketone (PEEK)
End Uses:Valve Seats, Piston Rings, Semiconductor Applications

Due to its excellent thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of high-performance plastics (HPM).

Applications:Medical, Cooling & Climate, Medical Devices & Assemblies
Product Families:Parts, Shapes & Films
Chemical Family:Polycarbonate (PC)
Polymer Name:Polycarbonate (PC)
End Uses:Medical Devices, Electrical/Electronic Applications, Medical/Healthcare Applications

Polycarbonate is a transparent material and belongs to the group of amorphous engineering plastics as well as to the polyester family of plastics. It has a high stiffness and extremely high impact strength. It also has a high glass transition temperature and heat deflection temperature (approx. +130 °C). The continuous operating temperature of PC ranges between approximately -60 °C and +120 °C. The material is highly resistant to high-energy radiation. However, it must be stabilized against UV rays, otherwise yellowing may occur. Like all polyesters, PC is not resistant to hot water (from approx. +60 °C) in the long term.

GEHR PBT banner

Applications:Equipment & Parts, Other Industrial Applications, Pumps, Turbines & Compressors
Product Families:Parts, Shapes & Films
Polymer Name:Polybutylene Terephthalate (PBT)
End Uses:Water Jacket Spacer, Valves, Tanks

Polybutylene terephthalate is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

GEHR PVDF banner

Applications:Medical Devices & Assemblies, Equipment & Parts, Other Industrial Applications
Product Families:Parts, Shapes & Films
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:Polyvinylidene Fluoride (PVDF)
End Uses:Medical Devices, Gaskets, Valves

Polyvinylidene fluoride shows a higher tensile strength, pressure resistance and dimensional stability than the related PTFE, but friction and insulation properties are lower. PVDF has a high mechanical strength and toughness at lower temperature and it’s self-extinguishing. The operating temperature ranges from -30 °C to +150 °C. PVDF shows a high resistance to chlorine, bromine and high-energy radiation.

GEHR PEI banner

Applications:Equipment & Parts, Other Industrial Applications, Other Parts & Components
Product Families:Parts, Shapes & Films
Polymer Name:Polyether Imide (PEI)
End Uses:Water Jacket Spacer, Valves, Gears

Polyetherimide has a high mechanical strength in connection with a good chemical and heat resistance (operating temperature up to +170 °C), good dimensional stability and creep resistance. lts unique torque strength permits the economical substitution of machined fabricated small parts from steel.

GEHR PET banner

Applications:Equipment & Parts, Other Industrial Applications, Pumps, Turbines & Compressors
Product Families:Parts, Shapes & Films
Chemical Family:Polyethylene Terephthalate (PET)
Polymer Name:Polyethylene Terephthalate (PET)
End Uses:Food Packaging, Tanks, Pump Parts

Polyethylene terephthalate is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

Applications:Building Materials, Parts & Components, Powertrain & UTH
Product Families:Parts, Shapes & Films
Chemical Family:Polyamides
Polymer Name:Polyamide 6 (PA 6), Polyamide 66 (PA 66), Polyamide 610 (PA 610)
End Uses:Bearings, Fittings, Gears

Due to its good thermal and mechanical properties, this semi-crystalline material belongs to the polymer group of engineering plastics. In addition to its high strength, hardness and toughness, it has a high heat deflection temperature of -40 °C to approx. +100 °C. However, the good damping capacity can only be achieved after conditioning, so this material should be re-conditioned after tempering. The material also has good sliding and dry-running properties. Due to the increased moisture absorption behavior in comparison to other polymer materials, possible dimensional changes as well as changes in the mechanical and electrical properties must be taken into account prior to material configuration.