SAFECARE Graffiti, Tar & Gum Remover - GEMTEK

Knowde Enhanced TDS

Identification & Functionality

Product Type: Graffiti Remover,
Tar Cleaner
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Cleaners
Commercial Cleaners,
Industrial Cleaners

Features & Benefits

Labeling Claims: Aldehyde-free,
Ammonia-Free,
Biodegradable,
Environmentally Friendly,
From Renewable Resources,
Glycol ether-free,
Natural,
Non-Carcinogenic,
Non-Corrosive,
Non-Flammable,
Non-Hazardous,
Non-Phenolic,
Non-Reactive,
Non-Toxic,
Petroleum-free,
Plant-Based,
Silicone-free
Ready-to-Use Product Features: Degreasing,
Effective Soil Removal,
High Performance,
Low Foaming,
Reusable
Features & Benefits: SAFE CARE® PRODUCTS ARE:

Non-toxic

Non-reactive

Non-carcinogenic

Readily biodegradable

Derived from renewable resources

Safe to use, store and dispose of

SAFE CARE® PRODUCTS DO NOT CONTAIN:

Petroleum distillates

Glycol ethers

Terpenes

Synthetics

Builders & reagents

Caustics

Applications & Uses

Markets: HI&I Care
Applications: HI&I Care — Home Care
Carpet & Upholstery,
Surface Care
HI&I Care — Institutional & Industrial Care
Industrial Cleaning
Applications & Uses: SC-Graffiti, Tar & Gum Remover is a powerful replacement for:

Xylene

Toluene, Methyl benzene

Methyl Ethyl Ketone

Glycol Ethers, Butyl Cellosolve

Kerosene, Mineral Oil

INSTRUCTIONS

When removing grease, tar, gum, or similar materials from carpeting or upholstery fabrics, begin by scraping off any loose material with the edge of a spatula-like tool. Apply a small amount of SC-Graffiti, Tar & Gum Remover and allow to dwell for 5 to 10 minutes before agitating with a nylon brush. For best results, rinse soil and residual product with an aqueous cleaning solution. Warning: Pre-test small inconspicuous area before applying. SC-Graffiti, Tar & Gum Remover should not be left on surfaces for a prolonged period of time because it will remove most paints or may damage some acrylic surfaces.

Properties

	Value	Units	Test Method / Conditions
Boiling Point	144.0	ºC	-
Flash Point	66.0	ºC	-
Specific Gravity (60/60°F)	1.0	-	-
pH Range (With Water Dispersion)	6.9	-	-

Regulatory & Compliance

Certifications & Compliance: Occupational Safety & Health Administration (OSHA),
USDA BioPreferred
Regulatory & Compliance: SCGraffiti, Tar & Gum Remover complies with:

OSHA 29-CFR Ch. XVII 1910.1200 and 40 CFR Ch. 1, Subparts C & D

USEPA 600, 4-90, 027 for aquatic toxicity

USEPA 601 & 602 for VOC testing

USDA BioPreferred® Program