Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Recommended Applications
Intricate geometries with thin cross sections or long flow lengths, for high strength and stiffness as well as good ductility.
Properties
- Color
- Flame Rating
- Mechanical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Processing Parameters
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Strength | 115 | MPa | ASTM D 790 |
| Compressive Strength | 125 | MPa | ASTM D 695 |
| Elongation at Break | 2 - 5 | % | ASTM D 638 |
| Flexural Modulus | 4.5 | GPa | ASTM D 790 |
| Izod Impact Strength(Notched) | 13 | J/m | ASTM D 256 |
| Izod Impact Strength(Un-notched) | No Break | J/m | ASTM D 256 |
| Tensile Modulus | 4.3 | GPa | ASTM D 638 |
| Tensile Strength | 80 | MPa | ASTM D 638 |
| Value | Units | Test Method / Conditions | |
| Continuous Use Temperature ( Expected) | 280 | °C | UL 746B |
| Glass Transition Temperature (Tg) | 152 | °C | ASTM D 3418 |
| Heat Deflection Temperature (HDT) | 175 | °C | ASTM D 648 |
| Melting Point (Tm) | 372 | °C | ASTM D 3418 |
| Value | Units | Test Method / Conditions | |
| Density at 23°C | 1.3 | g/cc | - |
| Mold Shrinkage (400°C nozzle, 210°C Mold) ( Across Flow) | 1.3 | % | - |
| Mold Shrinkage (400°C nozzle, 210°C Mold) ( Along Flow) | 1 | % | - |
| Spiral Flow (400°C nozzle, 220°C Mold) | 648 | mm | ASTM D 3123 |
| Water Absorption | 0.08 | % | ASTM D 570-98 |
| Hardness | 86 | Shore D | D 2240-05 |
| Rockwell Hardness | 103 | Scale R | 785/M Scale |
| Value | Units | Test Method / Conditions | |
| Arc Resistance | 175 | Sec | ASTM D 495 |
| CTI | 145 | V/50 drops | ASTM D 3638 |
| Dielectric Strength | 17 | Kvmm-1 | ASTM D 149 |
| Surface Resistivity | 10^16 | Ω | ASTM D 257 |
| Volume Resistivity | 10^16 | Ωcm-1 | ASTM D 257 |
| Value | Units | Test Method / Conditions | |
| Flammability | V-0 | - | UL 94/0.8 mm |
| Value | Units | Test Method / Conditions | |
| Drying Temperature at 150°C | 4-6 | hr | - |
| Hopper/ Throat Temperature | 60-80 | °C | - |
| Mold Temperature | 200-220 | °C | - |
| Nozzle Temperature | 400 | °C | - |
| Temperature Settings | 390-400 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Viscosity at 400°C | 140-200 | Pa.s | ASTM D 3835 |
Regulatory & Compliance
- Certifications & Compliance