Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- The Fastex® Surface Modifier protects against metal-to-metal contact.
- Exceptional shock load protection
- Quick separation from water to resist forming permanent emulsions
- Extremely high-level resistance to oxidation and chemical degradation
- Non-Corrosive to steel and non-ferrous gear set components
- Resists sludge and varnish formation at high temperatures
- The exceptional low friction characteristics contribute to reduced energy consumption.
- Proven performance extends to service and maintenance intervals.
- The Fastex® Surface Modifier Technology
It is a complex package of esters combined with a highly refined and modified hydrocarbon-based fluid, specifically formulated to improve Boundary Lubrication. It both significantly reduces friction and improves the anti-wear characteristics of metal surfaces. This modified surface has a much higher shear strength to protect equipment and improve operating performance. It protects against thermal damage traditionally caused by extreme loading pressures, oil film breakdown or lubricant failure by providing low friction and good anti-wear barrier between metal surfaces.
Applications & Uses
- Applications
- Application Area
- Applications
- FASTEX® FBOG150 has been developed and independently load tested for applications in closed, splash or circulating gear drives where extreme pressure oils are used. Offers premium wear protection and service life to straight and spiral bevel, helical, herringbone, rack & pinion, spur and worm gear sets.
- Industrial - conveyors, dryers, extruders, mixers, pumps, reducers, presses, agitators, crushers.
- Marine - main propulsion, deck machinery winches, windlasses, pumps, cranes, elevators, centrifuges and rudder carriers, shaft couplings.
Properties
- ISO Viscosity Grade
- Typical Properties
Value | Units | Test Method / Conditions | |
Viscosity (40°C) | 148.9 | cSt | ASTM D-445 |
Viscosity (100°C) | 15.5 | cSt | ASTM D-445 |
Viscosity Index | 106.0 | — | ASTM D-2270 |
Flash Point | 464.0 | °F | ASTM D-92 |
Pour Point | -22.0 | °F | ASTM D-97 |
Four Ball EP Test (Load Wear Index) | 53.0 | — | ASTM D-2783 |
Four Ball EP Test (Last Non-Scizure Load, Scar) | 100.0 | kg | ASTM D-2783 |
Four Ball EP Test (Last Scizure Load, Scar) | 250.0 | kg | ASTM D-2783 |
Four Ball EP Test (Weld Load) | 315.0 | kg | ASTM D-2783 |
Rust Prevention (Procedure A) | PASS | — | ASTM D-665 |
Rust Prevention (Procedure B) | PASS | — | ASTM D-665 |
Technical Details & Test Data
- Performance Specifications
FASTEX® FBOG150 meets or exceeds the following performance specifications:
- US Steel 224
- AGMA 9005-D94
- GM LS2
- Cincinnati-MilacronP-77
- Flender
- Hanson
- Bijur Applicators
Packaging & Availability
- Packaged Sizes
- 1.1 US Gal
- 5.3 US Gal
- 55 US Gal
- 264 US Gal
Storage & Handling
- Precautions
FASTEX® FBOG150 should be stored in dry conditions, under cover, at above freezing temperatures & away from ignition sources. To avoid contamination, drum and can lids should be closed tightly.