Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Agrochemical Functions
- Technologies
Features & Benefits
- Agrochemicals Features
- Viscofol Technology
- Manufactured to pesticide standards of quality
- The foliar nutrition equivalent of pesticide SC
- Finely milled particles give better leaf coverage
- Better leaf coverage plus smaller particles gives better uptake by the crop
- High nutrient loading
- Super tank-mix ability
- Stable with long shelf life
- Stable & Rainfast
- The finely milled particles give a uniform layer on the leaf, allowing a much increased surface area for absorption.
- This uniform layer+ our unique adjuvant system gives faster uptake and allows the product to be rainfast within 30 minutes.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Mixing Sequence
- Shake bottle well before use.
- Half fill spray tank with water and begin agitation.
- Empty the required quantity into the spray tank and add the balance of the water.
- Ensure agitation is maintained throughout the spraying operation.
- Do not allow the spray tank agitation to stop whilst product remains in the tank.
- Compatibility
Viscofol Calcium is tank mixable with most spray applied chemicals.
- Applications
Application Rate: Typically 3-5 liter/ha in 200 liters of water. Refer to crop specific information below.
Crop Dose rate Tree fruit (avocado, papaya, apple, pear, guava, citrus, peach, plum, walnut, etc.) 3.0 L/ha. - 5.0 L/ha from the appearance of flower buds.
500 L/ha water minimum. From the fall of the petals, 3 applications every 10 days.Berries (Strawberries, Raspberries, etc.) 2.0 L/ha - 3.0 L/ha to the appearance of the first flower buds and repeat 4 applications every 10 days.
Table Grapes For improving the post-harvest condition of the crop, use 3.0 L/ha – 4.0 L/ha.
Make 2-4 applications when berries are between 2-6mm and 8-10mm, depending on the area and variety.
Use a high water volume.Broccoli, cabbage and cauliflower 3.0 L/ha - 5.0 L/ha from the 4 to 9 sheet and repeat every 10-14 days up to 15 days before harvest.
Cucurbits (melon, watermelon, pumpkin, cucumber, etc.) 3.0 L/ha - 5.0 L/ha 1st application floral budding. 2nd application to fruit set and continue every 7 days during fruit development.
Lettuce 3.0 L/ha - 5.0 L/ha apply at 10-14 DAT and repeat if necessary every 10-12 days.
Vegetables (Garlic, Onions, etc.) 3.0 L/ha - 5.0 L/ha 1st application to the 4th leaf. 2nd application to the filling bulb.
Repeat application every 10 days.Potato 5.0 L/ha once emerged 100%, repeat as necessary at intervals of 10-14 days.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 1.73 - 1.79 | — | — |
| pH | 6.0 - 8.0 | — | — |
Storage & Handling
- Storage
- Protect from frost.
- Store above 5°C.
- Do not store in direct sunlight.
- Keep away from food, drink and animal feed.
- Keep out of reach of children
- GCiC Viscofol formulations are highly stable and have a shelf life of minimum 2 years.