Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
- Processing Method
- Injection Molding
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Impact Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus (at 23°C) | 3350 | MPa | ISO 527-2 |
| Tensile Strain (at Break, 23°C) | 7 | % | ISO 527-2 |
| Tensile Stress (at Yield, 23°C) | 85 | MPa | ISO 527-2 |
| Value | Units | Test Method / Conditions | |
| Density | 1.13 | g/cm³ | ISO 1183 |
| Molding Shrinkage Across Flow (at 23°C) | 1.8 | % | ISO 294-4 |
| Water Absorption Saturation (at 23°C, 24 hr) | 3 | % | ISO 62 |
| Water Absorption Saturation (at 23°C) | 9 | % | ISO 62 |
| Molding Shrinkage Flow (at 23°C) | 1.50 | % | ISO 294-4 |
| Value | Units | Test Method / Conditions | |
| Ball Pressure Test (at 125°C) | Pass | - | IEC 60695-10-2 |
| Ball Pressure Test (at 165°C) | Pass | - | IEC 60695-10-2 |
| Continuous Use Temperature | 85 | °C | IEC 60216 |
| Heat Deflection Temperature (at 0.45 MPa, Unannealed) | 160 | °C | ISO 75-2/B |
| Heat Deflection Temperature (at 1.8 MPa, Unannealed) | 65 | °C | ISO 75-2/A |
| Value | Units | Test Method / Conditions | |
| Comparative Tracking Index (at 3.2 mm, Solution A) | 600 | V | IEC 60112 |
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms cm | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Flame Rating | V-2 | - | UL 94 |
| Value | Units | Test Method / Conditions | |
| Dart Impact (at 23°C) | No Break | - | ISO 179/1eU |
| Notched Izod Impact (at 23°C) | 4 | kJ/m² | ISO 179/1eA |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability