Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Mil-G-15624F Type III Buna-N Rubber vs. Brandonite® 1200-60A
PROPERTIES MIL-G-15624F
TYPE III BUNA-N RUBBERBRANDONITE COMPARISON Tensil Strength (psi min) 1,550 4000 158% greater Ultimate Elongation (% min) 400 492 23% greater Shore A Hardness (max) 50 64 32% harder Specific Gravity (max) 1.400 1.083 22% lighter Compression Set (% max) 30 14 53% lower
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
Brandonite® 1200-60A is specially designed and manufactured to meet defense and industrial applications. It meets FED-STD-601, Test Method 3211, and MIL-P-4861 Level A, MIL –G-15624F, MIL-STD-407 and MIL-STD-105 requirements. Typical applications include a variety of gaskets for sealing uses in the temperature range of -20°F to 200°F.
Brandonite® 1200 - 60A is designed to excel in a range of agricultural, marine, and submersible applications including:
- Custom-molded shapes
- Diaphragms
- Access hatch gaskets & seals
- Water pump gaskets & seals
- Vibration and shock mounts
- Deep-sea gaskets & seals
- Marine gaskets & seals
- Mooring Systems
Properties
- Typical Properties
- General Properties
Durability/Weathering
Excellent
Elongation
Excellent
Hydrolytic Stability
Excellent
Moldability
Excellent
Rebound
Excellent
Tensile Strength
Excellent
Weight/Specific Gravity
Excellent
Higher Temperature Service
Fair
Diesel/Gasoline Resistance
Fair/Good
Compression Set
Good
Abrasion Resistance
Outstanding
Durometer Range
Outstanding
Low Temperature Resistance
Outstanding
Mold/Fungi Resistance
Outstanding
Ozone Resistance
Outstanding
Tear Resistance
Outstanding
UV Resistance
Outstanding
Value | Units | Test Method / Conditions | |
Specific Gravity (23°C) | 1.08 | — | ASTM D 792 |
Hardness | 65 | Scale A | ASTM D 2240 |
Tensile Strength | 4000 | PSI | ASTM D 412 |
Young’s Modulus | 172000 | PSI | ASTM D 412 |
Elongation at Break | 492 | % | ASTM D 412 |
Tear Strength | 225 | lb/inch | ASTM D 624 |
Compression Set | 14 | % | ASTM D 395 |
Temperature Range | -20 - 200 | °F | — |
Regulatory & Compliance
- Quality Standards