Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Advantages
- Cures to a tough, flexible protective barrier
- Formulated to allow maximum film thickness with minimal sagging or flow
- Does not contain asbestos or VOC’s
- Meets ASTM D 1227, Type 111, Class I, D 1187, Type 1
Applications & Uses
- Markets
- Application
Ultra-Shield Dampproofing is ready to apply as is directly from the container. Do not heat or thin. All application surfaces must be clean and free of standing water, dirt, dust, debris, oils, failed previous coatings and any other contaminants that may affect adhesion of the coating. Honeycombed concrete or cracks in the walls should be repaired with non-shrinking grout prior to the application of Ultra-Shield Dampproofing. After all preparatory work has been completed, Ultra-Shield Dampproofing should be applied over the entire surface at a minimum rate of 30 - 40 sq. ft. per gallon. To minimize pinholes and ensure maximum performance, apply two coats, each at ½ the recommended coverage rate. The second coat should be applied perpendicular to the first.
- Limitations
Do not use on or with products containing coal tar. Do not apply to areas which pond water. Do not apply if temperatures are expected to fall below 45˚F (7.2˚C). or if rain or heavy dew is expected within 24 hours of the application. Ultra-Shield Dampproofing should not come in contact with potable water. Do not thin and keep the material from freezing.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Drying Time (70°F, 50% RH) | 1.0 | hour | - |
pH | 6.2 - 7.2 | - | - |
Solids (by Weight) | 45 - 55 | % | ASTM D 6511 |
Viscosity (200 gpm) | 800 - 1100 | grams | Stormer |
Weight | 8.3 - 8.7 | lbs./gal | ASTM D 6511 |
Storage & Handling
- Shelf Life
- 1 Year
- Clean - Up
Clean tools and equipment with mineral spirits immediately after use. Clean hands and skin with a waterless cleaner.