company tower banner
Gowan Company Company Logo

Affiance® Fungicide

1 of 1 products in this brand
Affiance® Fungicide is a highly systemic, dual mode of action, unique formulation, and broad spectrum fungicide registered for use on corn and soybeans.

Functions: Fungicide

Fungicide Target Species: Alternaria, Biopolaris, Cercospora, Colletotrichum, Diaporthe, Puccinia, Rhizoctonia, Sclerotinia, Septoria

FRAC Code: 3

Application Technique: Sprayers

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
FRAC Code
Agrochemical Functions
Technologies
Composition
  • ACTIVE INGREDIENT
  1. Tetraconazole - 7.48%
  2. Azoxystrobin -  9.35%
  • OTHER INGREDIENTS - 83.17%
  • Total - 100.00%

Features & Benefits

Agrochemicals Features
Product Highlights
  • Better disease protection than less systemic fungicide brands for improved yield and crop quality
  • Dual modes of action to control resistant diseases, or prevent the development of disease resistance, leading to better crop protection and higher yields
  • Micro-emulsion (ME) formulation for better coverage and faster movement into treated plants, for faster and more complete disease protection to maximize yield

Applications & Uses

Application Technique
Directions For Use
  • It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do notapply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation

Properties

Physical Form

Safety & Health

Hazards To Humans And Domestic Animals
  • CAUTION :Harmful if absorbed through skin. Harmful if swallowed. Avoid contact with skin, eyes, or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.Human flagging is prohibited.
Personal Protective Equipment (PPE)

Applicators and other handlers must wear:

  • Long sleeved shirt and long pants
  • Shoes plus socks
  • Chemical resistant gloves made of any water proof material, such as:barrier laminate, butyl rubber > 14 mils, nitrile rubber > 14 mils, polyvinyl chloride (PVC) > 14 mils, and viton > 14 mils.

Follow manufacturer’s instructions for cleaning/maintaining PPE. If no such instructions for washablesexist, use detergent and hot water. Keep and wash PPE separately from other laundry

User Safety Recommendations

Users should:

  • Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
  • Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
Environmental Hazards
  • This product is toxic to fish, aquatic invertebrates, and freshwater and estuarine/marine fish. Azoxystrobin can be persistent for several months or longer. For terrestrial uses: Do not apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when disposing of equipment wash water or rinsate

Ground Water Advisory : Azoxystrobin and a degradate of azoxystrobin are known to leach through soil to ground water under certain conditions as a result of label use. This chemical may leach into ground water if used in areas where soils are permeable, particularly where the water table is shallow.

Surface Water Advisory:  This product may impact surface water quality due to runoff of rain water. This is especially true for poorly draining soil and soils with shallow ground water. This product is classified as having a high potential for reaching surface water via runoff for several months or more after application. A level, well-maintained vegetative buffer strip between areas to which this product is applied and surface water features such as ponds, streams, and springs will reduce the potential of leading of azoxystrobin and a degradate of azoxystrobin from runoff water and sediment. Runoff of this product willbereduced by avoiding applications when rainfall or irrigation is expected to occur within 48 hours.

 

Storage & Handling

Storage and Disposal
  • DO NOT contaminate water, food or feed by storage and disposal.
  • PESTICIDE STORAGE: Store in original container only in a dry, temperature-controlled, secure, place. Keep container closed when not in use. Do not store near food or feed
  • PESTICIDE DISPOSAL: Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of according to label instructions, contact your State Pesticide or Environmental Control Agency or the Hazardous Waste representative of the nearest EPA Regional Office for guidance
  • CONTAINER HANDLING: For rigid, non-refillable containers (2.5 to 5 gallons):Nonrefillable container. Do not reuse or refill this container. Clean container promptly after emptying. Triple rinse as follows: Empty the remaining contents into applicationequipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container one-fourth full with water andrecap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times.Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning. If burned, stay out of smoke.
  • For rigid, non-refillable containers that are too large to shake (with capacities greater than 5 gallons): Nonrefillable container.Do not reuse or refill this container.Clean containerpromptly after emptying.Triple rinse as follows:Empty the remaining contents into application equipment or a mix tank.Fill the container one-fourthfull with water.Replace and tighten closures.Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds.Stand the container on its end and tip it back and forth several times.Turn the container over onto its other end and tip it back and forth several times.Empty the rinsate into application equipment or a mix tank or store rinsate for later use or disposal.Repeat this procedure two more times.Then offer for recycling, if available or puncture and dispose of in a sanitary landfill, or by incineration, or, if allowed by state and local authorities, by burning.If burned, stay out of smoke.
  • PRESSURE RINSE PROCEDURE (all sizes):Pressure rinse as follows:Empty the remaining contents into application equipment or a tank mix and continue to drain for 10 seconds after the flow begins to drip.Hold container upside down over application equipment or mix tank or collect rinsate for later use or disposal.Insert pressure rinsing nozzle in the side of the container, and rinse at about 40 PSI for at least 30 seconds.Drain for 10 seconds after the flow begins to drip.
  • For rigid, refillable containers:Refillable container. Refill this container with pesticideonly. Do not reuse this container for any other purpose. Cleaning the container before final disposal is the responsibility of the person disposing of the container. Cleaning before refilling is the responsibility of the refiller. To clean the container before final disposal, empty the remaining contents from this container into application equipment or mix tank. Fill the container about 10 percent full with water. Agitate vigorously or recirculate water with the pump for 2 minutes. Pour or pump rinsate into application equipment or rinsate collection system. Repeat this rinsing procedure two more times.